hey i got a set of ssr sp1s from my s2000 i wanted to know if i could make them work on my g35 with brembos

19x7.5 +43
19x9.5 +55

 

19x7.5 is kinda weak in the front it's going to look weird those offset's don't help either, if your going to get aftermarket wheels on a G try looking into widths grater than 7.5 in the front. the back seems fine but again the offset is going to look weird stock G's have offset's in the thrity's not sure though my stockers are gone, so what i'm trying to say is

19=right diameter
7.5=wrong width
9.5=good could be better
offsets=FAIL, go with a lower offset
i think our bolt pattern is 5x143 but double check that i haven't been in my G in four months.

 

how about 9.5 all the way around i have 2 set of rears

 

nope, wheels have to be staggered, it's like that from the factory for a reason.

 

this sould help https://g35driver.com/forums/picture...ost-em-up.html

 

no. with those offsets, no.

 

You can run non-staggered.

You just have to run some pretty big a$$ spacers. lol

 

Sell the rims and buy rims w/ better offsets. Its not worth the trouble.

 

sp1 are hott!!

 

^ +1...your offsets are way to high. the wheels are going to look VERY small. but you can run a square setup (9.5 all around).

 

Why not try using spacers? I've always wanted to see SP1s on g35s