Anyone running a 20x10.5 front?
^Yes Levon is running a 10.5 front. He moved his rears to the front.
There are a couple other Sedans running 10s on the front but I'm pretty sure Levon is the only one running a 10.5.
There are a couple other Sedans running 10s on the front but I'm pretty sure Levon is the only one running a 10.5.
Yup, as others have confirmed I'm running 10.5's up front. 10.5 +0 to be specific. Aggressive? Yes. Stretch? Mucho. Hankook's 235/30. Poke. -4.7 camber. All I have done is just used the fender finisher and it pulled it on its own a tad. I don't have any sidemarker bracket issues because I have no sidemarkers.
Ride isn't bad at all, just a lil tougher to make U turns. Didn't really notice a difference from when I had the 9.5's up front. I've taken some pretty quick turns on the on ramp and still grips well while accelerating.
Ride isn't bad at all, just a lil tougher to make U turns. Didn't really notice a difference from when I had the 9.5's up front. I've taken some pretty quick turns on the on ramp and still grips well while accelerating.
Joined: Nov 2008
Posts: 14,524
Likes: 981
From: Ontario, Canada
I'm planning on buying beater wheels and they either come hella wide or hella thin lol
I know I'll get shot in the face for this but they're XXR521s I'm just going to run them for the daily grind because....
1. 20" tires are cheap and I can camber kill em.
2. 20" will give me a tiny bit of extra ground clearance
3. I plan on going with nice lips for next year and I don't need them getting mutilated by my fenders I don't want to re polish them every couple days.
Good news of my summer this year, my wheel hitting fender actually pulled my fenders slightly lol
I know I'll get shot in the face for this but they're XXR521s I'm just going to run them for the daily grind because....
1. 20" tires are cheap and I can camber kill em.
2. 20" will give me a tiny bit of extra ground clearance
3. I plan on going with nice lips for next year and I don't need them getting mutilated by my fenders I don't want to re polish them every couple days.
Good news of my summer this year, my wheel hitting fender actually pulled my fenders slightly lol
Lol. GGG-G35 (Chris) has 11's in the rear. Saw your other thread. I don't think he's having any issues at all with the rears. As for the fronts, if you do the 9.5 +20 and even with a 15 mm spacer you don't much work to be honest. I had Toyo's 225/35 on my 9.5 +3's with just a drop (no upper A arms yet) and it cleared. Fenders were rolled a tad, but again, if you use a fender finisher, it will give you the clearance you need. I had some slight tuck with those, well, not enough poke. Here's pics of that setup:






Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
May 31, 2020 01:26 PM






