Suspension/Wheel Combo Help
Suspension/Wheel Combo Help
Well to start it off I drive an 03' Coupe With the brembos.
My New Wheel Setup conisists of:
Front:
20x8.5 XXR 521's with a +32 Offset
245/35/20 Nitto NT555
Rear:
20x10 XXR 521's with a +30 Offset
275/35/20 Nitto NT555
I plan on lowering it with just springs, I want a drop that will kinda close up the fenderwell gap, but this is my DD and I dont wanna deal with rubbing when i go over bumps or turning etc.
Ive Been looking at Cobb Springs For the 350 z
It would lower it 1.25"(f) 1.4"(r)---(with the .5inch add in for z springs).
Running This Setp would I run into any major rub or fitment issues? Id prefer not having to Roll fenders and such.
My New Wheel Setup conisists of:
Front:
20x8.5 XXR 521's with a +32 Offset
245/35/20 Nitto NT555
Rear:
20x10 XXR 521's with a +30 Offset
275/35/20 Nitto NT555
I plan on lowering it with just springs, I want a drop that will kinda close up the fenderwell gap, but this is my DD and I dont wanna deal with rubbing when i go over bumps or turning etc.
Ive Been looking at Cobb Springs For the 350 z
It would lower it 1.25"(f) 1.4"(r)---(with the .5inch add in for z springs).
Running This Setp would I run into any major rub or fitment issues? Id prefer not having to Roll fenders and such.
Last edited by Jordan00711; Jan 4, 2011 at 12:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
FreshVQ
The G-Spot
4
Sep 30, 2015 01:41 PM
SuperSaiyan
New Members Check In
2
Sep 23, 2015 06:13 PM
JG_G35
Engine - Intake/Fuel
2
Sep 7, 2015 09:35 PM
