front 18x8.5 +30
rear 18x9.5 +25

both with centerbore 73.1 (if that matters)

im just so confused with the offsets... one website say they fit, and one website say they don't fit, so i'm going to ask here to be safe.

 

they well fit but they will be tucked in like stock wheels....

 

They won't be tucked nearly as bad as stock.

Those will fit but I suggest a 15 or 20mm spacer in the front and at least a 10mm in the back.

 

Ohh.. I see now, so the higher the offset, the farther the rims goes out, thanks alot my g guys! Lol

 

No, the higher the offset the more it will be sunken in. Lower the offset, the more it will come out from the wheel well.

 

+1..

+40 offset will be sunk in more than a +20..

Once you pass -0- offset it switches... -10 will stick out less than -20.

 

So basically the front's +35 will stick out more than the rear's +25.... But i guess the rear's 9.5 will cover that difference?

 

no the +25 will be more flush....you have the offsets backwards....the lower the positive (+) offset the more flush they will be...

 

^^this

 

O yea... Ok. I think i get it now. Thx alot guys