Just ordered my vs-xx's in burning black
#1
Just ordered my vs-xx's in burning black
I just ordered my vs-xx's yesterday, and i went with 20x9.5 +0 and 20x11 +6 both O-disc. Im lowered on
Stance Gr+. I know i have to get my fenders rolled flat but does anyone know what camber specs i might be looking at?
Stance Gr+. I know i have to get my fenders rolled flat but does anyone know what camber specs i might be looking at?
Last edited by ptd23; 03-08-2011 at 02:47 PM. Reason: forgot info
#3
It depends on how low and what size tires you're running.
This guy here is at 2.2, so I'm guessing you might be at 2.5-2.7, that's just a wild guess.
This guy here is at 2.2, so I'm guessing you might be at 2.5-2.7, that's just a wild guess.
I would suggest tire sizes 255/30/20 for the front since this is just .02% difference from the OEM 19" diameter. 285/30/20 for the rear is also .2% diameter difference, this means that your speedometer will be very close to OEM specs.
If you decide to go with these tire sizes the front will be almost flush with a 9.5" rim and the rear will be stretched by 10 mm on each side. If you aren't looking for an aggressive setup then go with a (+18 offset all around or close) your camber will be around -1.7 for the front and -1.8 for the rear with your current drop. If you lower your car more you will need a greater camber than 2 degrees to not rub with those tires. Unless you flare your fenders or use narrower tires.
20 x 9.5 +18 with tires 255/30/20
20 x 11 +18 with tires 285/30/20
I would play around on this website to help you determine your offsets.
http://www.wheelsmaster.com/rt_specs.jsp
I run 20x9.5 +15 w/ 255/30/20 camber of -2.2 and 20x11 +15 w/ 285/30/20 camber of -2.1. I'm also dropped lower than you on Stance coils so your camber should be less aggressive. I hope that helps.
If you decide to go with these tire sizes the front will be almost flush with a 9.5" rim and the rear will be stretched by 10 mm on each side. If you aren't looking for an aggressive setup then go with a (+18 offset all around or close) your camber will be around -1.7 for the front and -1.8 for the rear with your current drop. If you lower your car more you will need a greater camber than 2 degrees to not rub with those tires. Unless you flare your fenders or use narrower tires.
20 x 9.5 +18 with tires 255/30/20
20 x 11 +18 with tires 285/30/20
I would play around on this website to help you determine your offsets.
http://www.wheelsmaster.com/rt_specs.jsp
I run 20x9.5 +15 w/ 255/30/20 camber of -2.2 and 20x11 +15 w/ 285/30/20 camber of -2.1. I'm also dropped lower than you on Stance coils so your camber should be less aggressive. I hope that helps.
#5
#7
your gonna have to wait 4-6 months for pics lol... but i talked to d&g35 and i think they were 19's too.
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM
Tolboothwilley™
Exterior-Vendor
6
07-28-2016 12:42 AM