I just ordered a set of these 20x9 +13 and 20x11 +13 for my 08 g37s. Im dropped on H&R springs, and am trying to find out what tire sizes to run. Another guy on myg37 has these wheels and is running 225/35 front and 255/35 rear. I honestly dont care too much for stretch so what are my other options? i dont want too much lip exposed. Thanks

 

you should be able to run 245/35 & 275/30's if you just have h&r springs. it'll still have a little strech to it, but i don't dig on that 'about to pop off the bead' look either.

 

[IMG][/IMG]
[IMG][/IMG]

 

so did anyone get the answer to this ???

 

^^ See post 42.

 

I ordered mine from the Ukrain.

 

Does anyone have these wheels and run 350z tein s techs? That was my plan but since one4one posted his pic I'm not sure if it'll be too low for these wheels or not

 

I had a question and yes, i have been doing a lot of research....currently im lowered on tein s-techs (z) with the rear springmount mod running my oem rays with a 20mm spacer in the front and 25mm spacer in the rear. i recently ordered some xxr 526 wheels 20x9+13 f and 20x11+13 r. I am planning on swapping the spacers (put the 25mm up front and 20mm on the rears) and i will be running 225/35 f and 255/35 rear for some stretch. I will be getting my fenders rolled, my question is will I need to roll my fronts as well due to the spacers and will I even be able to run that setup with those spacers without a fender roll AND pull? Im trying to avoid a pull. I have been doing a lot of research and I see people have run 20mm spacers in the rear with just a pull and 25mm up front but im not sure if that person had a pull up front as well (saw it on 2 diff cars). I was also thinking about leaving the spacers as they are now with the 526 wheels but don't know if that's too much as I can't find anyone that has 25mm spacers on the rears with that width and offset. I want an aggressive look but I don't want to have rubbing issues as it is my daily driver in San Diego. oh, and I will also be running pretty much normal camber with no camber kit. any help would be appreciated, thanks.

 

I'm just guessing at this but I think ur going to be way to aggressive with those spacers to not be rubbing without a pull. U might want to look at some smaller spacers. I'd go with something that isn't gonna give u too much negative offset and even then u might need to pull the fenders

 

i just got a set of these bad boys delivered today I will post pics in about 2 weeks after they're mounted and my fenders are rolled. Oh, and I purchased different stickers for the center caps because i didn't want to rock the xxr ones that come with the wheels.

20x9 -7 (with spacer) 225/35
20x11 +13 255/35

 

Order the different sticker from??

 

godddamn niceee

 

Helllo fellas,

I came across this thread and fell in love with the XXR 526

My question is, I found someone selling these rims with these specs

Front Rims are 20X9.0 +13 offset with over 3" Lip
Rear Rims are 20x11 +11 offset with a 5" Lip

I currently have a 04 G35 w/ G Eibach Sportline Springs w/ front and rear SPC camber kits, also with Z Tokico Hp Blues. I also do not have brembo brakes;

If I plan not to use any spacers, will I need to have my fenders rolled or pulled, add additional negative camber or stretched tires to get these to fit? Also what tires would you all recommend I get.

I would prefer not to have my fenders pulled or rolled.

If I do want that flushed look. what size spacers would you recommend?

Thanks guys, I love the G community! Any help would be gladly appreciated

 

Shouldn't have to roll or pull the fenders without spacers. No extra camber and 225/35 and 275/30 tires.

Those have a little stretch but not much. 15mm spacers would be good all the way around. You

would need to roll the rears then or add negative camber. I have basically your setup without the

camber arms and I daily drive mine.

 

Not as sexy as u boys with the 20's but my 17x9s keep me happy in my sr20det 180sx



Annd maybe just a sneak peak of my 18" te37s on my rb30det r32 for bonus points