Wheels & Tires Grabbing the road and stopping.

Will these HREs fit my G?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Dec 17, 2011 | 07:27 PM
  #1  
Raaaaaaaandy's Avatar
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 89
Likes: 0
Will these HREs fit my G?

I have the ability to pick up a set of 20 HRE's for a great price... They are 8" up front an 10.5" in the rear. They are coming off of an SC430 which the sit flush on... Since HREs don't display offsets, will these work?

Will I need hub centric spacers? Or spacers in general?

I am looking to put these on an '06 G coupe, sports package, stock breaks.

Any insight would help...


Thanks
 
Reply
Old Dec 19, 2011 | 05:44 PM
  #2  
4DGS's Avatar
Registered User
iTrader: (69)
Joined: Nov 2008
Posts: 14,524
Likes: 981
From: Ontario, Canada
Can you get me a pic of the SC?

The front is no problem at all and the rear is 99% chance of working. There is just a slim slim chance that the rear may be very aggressive.

One thing to keep in mind, if these wheels are a single owner (as in the guy with the lexus bought them new) then you're going to need to center bored out to fit the Nissan hub. Lexus uses a 56.1mm hub bore where as Nissan uses 66.1mm hub bore.

You'll probably want spacers in the front judging by the wheel width, but that can be determined later on.
 
Reply
Old Dec 19, 2011 | 08:39 PM
  #3  
Raaaaaaaandy's Avatar
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 89
Likes: 0
I couldn't get a picture of the wheels on the car, but I did get a serial number off each... Is there a way to tell by those?

Front, r5u20p296520
Rear, R5U20P357060

Thanks for your help!
 
Reply
Old Dec 19, 2011 | 10:58 PM
  #4  
805350z's Avatar
Registered User
Joined: Dec 2011
Posts: 18
Likes: 2
No way to tell unless the owner does backspacing measurements. id stay away from having such a skinny wheel up front with a 10.5 in the back ( then again i cant see how the lip is on the front wheel)
 
Reply
Old Dec 19, 2011 | 11:41 PM
  #5  
Sylvan lake V35's Avatar
Registered User
iTrader: (37)
Joined: Sep 2006
Posts: 5,746
Likes: 312
From: Alberta
+29 front offset +35 rear they are pretty weak offsets for a G
 
Reply
Old Dec 20, 2011 | 01:19 AM
  #6  
805350z's Avatar
Registered User
Joined: Dec 2011
Posts: 18
Likes: 2
^this, and depending on price, you can custom build another wheel to your exact likings.
 
Reply
Old Dec 20, 2011 | 07:53 AM
  #7  
Raaaaaaaandy's Avatar
Thread Starter
|
Registered User
Joined: Apr 2010
Posts: 89
Likes: 0
Thanks for the help guys, they would cost me under $1k for the set... Still not worth it?

Also, I have a set of Volk CE28s 19x8.5 front and 19x10.5 rears. +22 all around, but one has a small bend and they could use a refinishing.

Think I should stick with those?
 
Reply
Old Dec 20, 2011 | 03:53 PM
  #8  
neal@tirerack's Avatar
PLATINUM SPONSOR
iTrader: (4)
Joined: Apr 2009
Posts: 1,062
Likes: 31
Offsets are incorrect from car/car and the center bore on the Lexus is smaller than the hub diameter on the G. Doubt it will work.
 
Reply
Old Dec 20, 2011 | 06:17 PM
  #9  
4DGS's Avatar
Registered User
iTrader: (69)
Joined: Nov 2008
Posts: 14,524
Likes: 981
From: Ontario, Canada
Holy **** 1k.... buy em and sell em.

If they are multipiece wheels they are worth $2000 easily.
 
Reply
Old Dec 21, 2011 | 11:13 AM
  #10  
whoozyadaddy7's Avatar
Registered User
iTrader: (13)
Joined: Sep 2009
Posts: 631
Likes: 25
From: Ax
^ +1 Goodness that's dirt cheap.... Buy em for under a grand then sell em to me for 1200 if you don't like them
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VatoVazq
Steering & Suspension
16
Jan 3, 2025 11:08 PM
Claudiu
V36 Brakes, Suspension, Wheels & Tires
3
Mar 10, 2018 11:38 AM
dseet
G35 Sedan V36 2007- 08
2
Oct 11, 2015 12:40 AM
Claudiu
G35 Sedan V36 2007- 08
0
Sep 26, 2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 07:50 AM.