squeaking bushings from control arms after rain.......

Subscribe
Jan 18, 2005 | 06:17 PM
  #1  
now that the rains are gone in so-cal, i have this constant squeaking from what i believe is from the kinetix front control arm bushings........tried wd-40, worked for a day, then heavy duty silicone spray, also worked for a day and the god-awful squeaking/moaning came back.......how bad is it? let's just say you can hear it cruising down a flat pacth of road from inside the cabin! i would hate to put back the oem arms as that will just reintroduce the negative camber problems again.......inputs please!
Reply 0
Jan 18, 2005 | 09:00 PM
  #2  
What does Kinetix say about that?

I would try lithium grease, but you'll have to remove the arm and regrease everthing.
Reply 0
Jan 18, 2005 | 10:16 PM
  #3  
haven't called kinetix.........yet........funny thing, as i was backing into garage this evening....that squeaking/moaning was there as i turned the wheel while car was not in motion, so, could it be something else as well?
oh yeah, did you ever resolved your massive rear camber issue?
Reply 0
Jan 18, 2005 | 10:23 PM
  #4  
That could be your tires (not in motion just turning your steering wheel).

My massive rear camber issue? huh?
Reply 0
Subscribe