Need some help with my set up
wheel set up need help...!
Okay so i changed my mind about my old set up. I just order a set of rims.
19x8.5 offset 18 (front)
19x10.5 offset 25 (rear)
what tire size do you guys recommend? how to avoid vdc from going crazy.
will i need to roll any of my fenders? I am not dropped just yet. any advice will be much appreciated thanks.
Going on my 2003 G35 Coupe.
19x8.5 offset 18 (front)
19x10.5 offset 25 (rear)
what tire size do you guys recommend? how to avoid vdc from going crazy.
will i need to roll any of my fenders? I am not dropped just yet. any advice will be much appreciated thanks.
Going on my 2003 G35 Coupe.
Last edited by itztwinki3; Dec 30, 2014 at 04:33 PM. Reason: forgot to add which model I had
Okay so i changed my mind about my old set up. I just order a set of rims.
19x8.5 offset 18 (front)
19x10.5 offset 25 (rear)
what tire size do you guys recommend? how to avoid vdc from going crazy.
will i need to roll any of my fenders? I am not dropped just yet. any advice will be much appreciated thanks.
Going on my 2003 G35 Coupe.
19x8.5 offset 18 (front)
19x10.5 offset 25 (rear)
what tire size do you guys recommend? how to avoid vdc from going crazy.
will i need to roll any of my fenders? I am not dropped just yet. any advice will be much appreciated thanks.
Going on my 2003 G35 Coupe.
Need some help with my set up
I just bought a set of rims.
I have a 2003 g35 coupe and have not lowered yet.
Rim set up
19x8.5 offset 18 (fronts)
19x10.5 offset 25 (rears)
Few questions.
1. Which tire size should I go with without any rubbing or fender mods?
2. How to avoid Vdc acting up?
3. If I lower the car how low can I possibly go before I have no choice to cut or roll my fenders?
Your advice and help is much appreciated.. Thanks in advanced.
I have a 2003 g35 coupe and have not lowered yet.
Rim set up
19x8.5 offset 18 (fronts)
19x10.5 offset 25 (rears)
Few questions.
1. Which tire size should I go with without any rubbing or fender mods?
2. How to avoid Vdc acting up?
3. If I lower the car how low can I possibly go before I have no choice to cut or roll my fenders?
Your advice and help is much appreciated.. Thanks in advanced.
I would go 245/40/19 front and 285/35/19 rear. If that's too much meat, drop to a 35 tire in front and 30 in rear.
Trending Topics
How you want it to look is up to you. Use the tire/rim calculator above your post and keep the difference between the front and rear tires under 3%. It essentially answers all of your questions provided you have a ruler.
depends really. i am putting in coilovers and rear camber kit was thinking about 1.5 inch drop front and 1 inch drop rear. how would i avoid do any fender mods? would i have to go stretched or normal? either or works for me as long as i wouldnt need to do fender mods.
do you guys think the 19x10.5 offset 25 is too wide for the coupe? if so i can send it back and grab the 19x9.5 offset 35 and grab some spacers to bring the offset lower.? what do you guys think?
I think 19x10.5 +25 should be fine, I ran the same width/offset with a 20 inch wheel and I wasn't rubbing. You could put a 275/35 on there, and it would stretch a little which should fit with no problems.
thanks i appreciate it
were u lowered at all? and did u do any fender mods at all?
Thread
Thread Starter
Forum
Replies
Last Post
Mad A
Not G35 Related
4
Dec 8, 2015 01:45 PM
FS[Canada]: G-Line 18" Black w/Chrome Lip with Tires + TPMS
bananax
Wheels & Tires CDN
0
Sep 10, 2015 06:14 PM



