05 G35 WIDEBODY wheel help
Thread Starter
|
Registered User
Joined: Oct 2018
Posts: 14
Likes: 0
coupe/custom paint/black leather interior/manual transmission/ rev-up/ 2+2
05 G35 WIDEBODY wheel help
This is my first ever post on any thread, but quick rundown about me. Ive always wanted a GTR but can't afford it or the insurance for that matter. Ive owned a 300zx twin turbo as my first car and it blew up within 3 hours of buying it from a sneaky private seller. Sold it for a fraction of the cost and drove shitty cars for year.
i then had an idea of how to get my dream car, and that was to build it myself and keep insurance low. So I searched for year and finally found a MANUAL 2+2 black leather red 05 G35 that only had 35,000miles on it. It was driven by a elder lady who garaged it 5 months out of the year since 05. I spent my bank account on it and installed a catback exhaust and left the engine stock so far as most upgrades wouldn't improve hp or torque too much unless I turbo it, but with my last experience with the 300zx it's debatable if that would be a good idea, (IF SOMEONE WANTS TO SPONSOR ME AND OAY FOR THE TWIN TURBO I'll accept it). But I bought "FIBER GLASS MAFIA" G35 fender flare kit, which dimensions are FRONT:+2.25 inches. BACK:+2.75 inches.... I bought custom rims but I got screwed over on that deal as well so they do not fit. After a custom paint job to finish the cosmetics, I need to sell my old rims and get new ones...considering going with 18" instead of stock 19" as the 20" rims I got screwed over on don't look right and are a bit too big for my taste like I knew before I was talked into them. Any help is GREATLY APPRECIATED.... AND here's some pics of my baby.
what width rims will I need to fill this gap of the widebody without spacers 275--30 20 are still a bit short, looks like an inch...... do I need 305s? Any online rim site suggestions?
i then had an idea of how to get my dream car, and that was to build it myself and keep insurance low. So I searched for year and finally found a MANUAL 2+2 black leather red 05 G35 that only had 35,000miles on it. It was driven by a elder lady who garaged it 5 months out of the year since 05. I spent my bank account on it and installed a catback exhaust and left the engine stock so far as most upgrades wouldn't improve hp or torque too much unless I turbo it, but with my last experience with the 300zx it's debatable if that would be a good idea, (IF SOMEONE WANTS TO SPONSOR ME AND OAY FOR THE TWIN TURBO I'll accept it). But I bought "FIBER GLASS MAFIA" G35 fender flare kit, which dimensions are FRONT:+2.25 inches. BACK:+2.75 inches.... I bought custom rims but I got screwed over on that deal as well so they do not fit. After a custom paint job to finish the cosmetics, I need to sell my old rims and get new ones...considering going with 18" instead of stock 19" as the 20" rims I got screwed over on don't look right and are a bit too big for my taste like I knew before I was talked into them. Any help is GREATLY APPRECIATED.... AND here's some pics of my baby.
what width rims will I need to fill this gap of the widebody without spacers 275--30 20 are still a bit short, looks like an inch...... do I need 305s? Any online rim site suggestions?
19X11 -15 with 295/30/19
19X12 -30 with 325/30/19
would probably need to trim the front bumper and stuff down so that you can turn.
Or go with a weaker front spec at 19X10 -30 with a 255/35/19.
19X12 -30 with 325/30/19
would probably need to trim the front bumper and stuff down so that you can turn.
Or go with a weaker front spec at 19X10 -30 with a 255/35/19.
Registered User
Joined: Nov 2020
Posts: 2
Likes: 1
G35 manual
This is my first ever post on any thread, but quick rundown about me. Ive always wanted a GTR but can't afford it or the insurance for that matter. Ive owned a 300zx twin turbo as my first car and it blew up within 3 hours of buying it from a sneaky private seller. Sold it for a fraction of the cost and drove shitty cars for year.
i then had an idea of how to get my dream car, and that was to build it myself and keep insurance low. So I searched for year and finally found a MANUAL 2+2 black leather red 05 G35 that only had 35,000miles on it. It was driven by a elder lady who garaged it 5 months out of the year since 05. I spent my bank account on it and installed a catback exhaust and left the engine stock so far as most upgrades wouldn't improve hp or torque too much unless I turbo it, but with my last experience with the 300zx it's debatable if that would be a good idea, (IF SOMEONE WANTS TO SPONSOR ME AND OAY FOR THE TWIN TURBO I'll accept it). But I bought "FIBER GLASS MAFIA" G35 fender flare kit, which dimensions are FRONT:+2.25 inches. BACK:+2.75 inches.... I bought custom rims but I got screwed over on that deal as well so they do not fit. After a custom paint job to finish the cosmetics, I need to sell my old rims and get new ones...considering going with 18" instead of stock 19" as the 20" rims I got screwed over on don't look right and are a bit too big for my taste like I knew before I was talked into them. Any help is GREATLY APPRECIATED.... AND here's some pics of my baby.
what width rims will I need to fill this gap of the widebody without spacers 275--30 20 are still a bit short, looks like an inch...... do I need 305s? Any online rim site suggestions?
i then had an idea of how to get my dream car, and that was to build it myself and keep insurance low. So I searched for year and finally found a MANUAL 2+2 black leather red 05 G35 that only had 35,000miles on it. It was driven by a elder lady who garaged it 5 months out of the year since 05. I spent my bank account on it and installed a catback exhaust and left the engine stock so far as most upgrades wouldn't improve hp or torque too much unless I turbo it, but with my last experience with the 300zx it's debatable if that would be a good idea, (IF SOMEONE WANTS TO SPONSOR ME AND OAY FOR THE TWIN TURBO I'll accept it). But I bought "FIBER GLASS MAFIA" G35 fender flare kit, which dimensions are FRONT:+2.25 inches. BACK:+2.75 inches.... I bought custom rims but I got screwed over on that deal as well so they do not fit. After a custom paint job to finish the cosmetics, I need to sell my old rims and get new ones...considering going with 18" instead of stock 19" as the 20" rims I got screwed over on don't look right and are a bit too big for my taste like I knew before I was talked into them. Any help is GREATLY APPRECIATED.... AND here's some pics of my baby.
what width rims will I need to fill this gap of the widebody without spacers 275--30 20 are still a bit short, looks like an inch...... do I need 305s? Any online rim site suggestions?
Thread
Thread Starter
Forum
Replies
Last Post