wheel alignment & camber question?
Thread Starter
|
Registered User
Joined: Mar 2005
Posts: 1
Likes: 0
wheel alignment & camber question?
i just lower my sedan with 350z spring & suspension. and this is what it come out:
left front
camber -1.0
caster 8.8
toe 0.10
right front
camber -1.5
caster 8.3
toe 0.07
left rear
camber -1.7
toe 0.10
right rear
camber -1.7
toe 0.14
do you guy think i need a camber adjustment kit?
and should i set the toe so both left & right wheels are the same?
left front
camber -1.0
caster 8.8
toe 0.10
right front
camber -1.5
caster 8.3
toe 0.07
left rear
camber -1.7
toe 0.10
right rear
camber -1.7
toe 0.14
do you guy think i need a camber adjustment kit?
and should i set the toe so both left & right wheels are the same?
Registered User
Joined: Oct 2004
Posts: 144
Likes: 0
From: Near Philly, PA
You should get a camber adjustment kit if you mind the additional wear on your tires. If you don't mind the additional wear and enjoy the handling benefit, then you can leave it. As of now you are out of spec, but not horribly.
As for toe, it's total toe that's most important, but yeah, you should try to get them even if you can.
As for toe, it's total toe that's most important, but yeah, you should try to get them even if you can.
Registered User
Joined: Aug 2004
Posts: 4,288
Likes: 3
i wouldn't worry about your camber...but with your toe-in I think your thrust
angle is off.
you have a lot of total toe-in on the front too. Usually I target around .10
on the total front, .30 on the total rear.
angle is off.
you have a lot of total toe-in on the front too. Usually I target around .10
on the total front, .30 on the total rear.
Thread
Thread Starter
Forum
Replies
Last Post
