SPC camber bolts
#1
SPC camber bolts
hey, i have a few questions. I lowered my car and now i have some camber issues. mostly in the front, so i definitely need a camber arm for the front. the rears are showing some negative wear, but not as bad. can i just purchase the spc camber bolts for the rears or do i need a whole camber kit?
#2
How much did you lower the car by? If you are only going down about an inch, I don't think you need to worry too much about the front. And you can get by with just the bolts. http://iapdirect.com/item.asp?invid=785
#3
#4
Registered User
iTrader: (1)
Join Date: Oct 2003
Location: NJ
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by g35thanh
I'm over an inch in the front and I already had to throw away some toyos that still had 60% tread..the rears aren't wearing out on the inside as bad, but its noticeable. i think an alignment might do the job for the rears.
I had the same problem I had to throw away perfectly brand new toyos with only 7K on them, but in the front I dont think the camber is your problem its you toe thats really crucial to tire wear. I have about 1.5" inch drop and my front camber was -1.8 compared to my rear -2.4 but my toe was OUT which made them wear very quickly, from what Im told I dont need front a-arms they should wear pretty evenly now that the toe is corrected. also for the rear you can save money and just get 2 set of the SPC bolts use 1 set for toe and the other for camber.
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM