Please advise!

I am looking to purchase a used set of SSR GT3s, the rear offset is at +44 whereas the front are at +27... he has hubcentric spacers of 5mm

I am curious if the offset is way off? Or if the hubcentric spacers can make it work, I am mainly concerned about the rear, don't want it too tucked in!

Won't be concerned if there's a little tuck, but what do you guys think w/ this setup? Can it work?

TIA

 

Bump :-d

 

dennis you already have a thread on these wheels. quit post whoring!

 

11" wheels are very wide. what size tire do you plan on using? It sounds like overkill, you are going to slow yourself down with such a large, heavy wheel.

Someone is having problems fitting a 10" https://g35driver.com/forums/wheels-tires/55427-people-who-have-wide-wheels-please-read.html

 

"This is a special set of SSR GT3's with polished lips and a special near-black-chrome looking center section. The fronts are 19x9 and the rears are 19x11. Mounted with Yokohama AVS Sport tires 255/40 front and 295/35 rears.

Front tires are near new, the rears are almost done. Three out of 4 wheels are perfect while the left rear has a curb mark on the lip. If someone took the time to do it, it would polish out well.

I want to sell these fast, and am only going to sell them locally, NO SHIPPING.

$1400 takes them. PM if interested.

http://www.ourgarage.com/misc/wheels_1.jpg

http://www.ourgarage.com/misc/wheels_2.jpg

http://www.ourgarage.com/misc/brakes_wheels_1.jpg "

Here's a cut/paste of the rims I am looking to get--still going to get them, just need your guy's advice

 

Please advise guys, I'm going to purchase these around 4PM today =D

 

my 285's look too big from the back already.....295's are way too big....dont do it......your car will look dumb...