Anybody have a DIY sway install? - G35Driver - Infiniti G35 & G37 Forum Discussion

Sep 9, 2005 | 05:13 PM

LjN_728

Thread Starter

Registered User

Joined: Aug 2005

Posts: 7,835

Likes: 3

Anybody have a DIY sway install?

I've been looking and looking for a G35 coupe sway install on this forum and the net, and all I've come up with is for the 350Z. Anybody out there have a DIY G35 coupe sway install with pictures? TIA!

Sep 9, 2005 | 09:34 PM

Triple8Sol

Registered User

iTrader: (151)

Joined: Aug 2003

Posts: 7,288

Likes: 0

From: Seattle, WA

There is one somewhere. I haven't bothered to look it up since it should be pretty straightforward once I get the car up on the lift...

Last edited by Triple8Sol; Sep 10, 2005 at 07:15 AM.

Sep 10, 2005 | 12:34 AM

andycon

Guest

Posts: n/a

yeah, I just installed Stillen sways on my sedan - piece of cake, and lovin' them - here's a link to some install notes, but you don't really need them. One tip: get a breaker bar - those nuts are pretty tight, then make sure you torque them back up to spec.

http://www.zchickz.com/evo-sway1.htm

Also, It might be easier on the sedan, but I had no problems getting the rear bar out/in without dropping the exhaust - I slid it towards the rear and angled one side as moving it back. (facing the rear, slide the left hand side out first).

I am running at stiff/stiff and loving it - best mod for me so far.

Sep 10, 2005 | 01:33 AM

G35MR2

Registered User

iTrader: (3)

Joined: Mar 2005

Posts: 235

Likes: 0

From: Philly Burbs

Yeah i just installed hotchkis sway bars on my coupe, and they are an awsome mod. Its a pretty straight forward install, as long as yor a little mechanicly clined you should be alright.