Before i type anything....YES i did do a search and got information on this rim. But i wanted to see if it was possible to have a 4.5-5" lip in the rear.

I was looking on the work website and i'm not sure what's the lowest offset i could go with our cars to get the most lip in the rear. This is the link to the specification sheet: http://worksuperwheels.com/wheels/vs...cation_19.html

I was thinking doing the deep dish wheels in the rear but i wasn't too sure how low of an offset i could go. I have volk gt-7's right now with about a +23 offset on the rear. So i was thinking since 4.5 inches of lip would equal to 114.3 mm and 5 inches of lip would equal to 127mm and i've been seeing some people running 19x10.5 or 19x11 in the rear. Soi was leaning towards the 19x11 with +23 offset which would give me 112mm of lip, but was wondering if there was any possible size/offset combo that would able me to fit any of the 125mm bracket?

And for the fronts i'm assuming i would have to go with the big caliper disk but not sure exactly which size i should have in the front as i'm more concerned with the rear lip. I'm pretty sure it would be a 19x9.5 ion the front though.

Basically any rim experts out there...what would be the proper specifications going by the link that would give me the biggest lip in the rear? BTW i also have brembos. I was also thinking about the equips also but i couldn't find any fitment sheet. Thanks in advance!

 

oh....i'm also aware that the face of the rim is flat....would that hinder me from having the excessive lip i would want because of the rear brembos?

 

Mega, we can help you with a set of WORK VS-XX or Equip wheels for you car, we can review the offset specs with you as well, just derrick@d2autosport.com

Good luck with the wheel choice!