OK, So Im about to order some wheels for the coming spring. I need to know IF I will rub.

Here are the specs: Volk Diamond Black GT-7s

19X9.5 +30 / 19X10.5 +24

Here are the tire specs: BFG TA KDW2's
245/35/19 - 285/35/19

According to Evolution Autosports in VA I will rub.

I am currently on stock ride height, HOWEVER i plan to use OEM 350z springs to lower about .5''.....HEEELP!!!



Now here's my dilemma...I already have tires basically brand new (2-3k miles)...IN case I WILL rub...what offset/size will I need to avoid this problem?? I CANNOT do fender rolling as im scared it'll mess up the paint etc etc etc not to mention I dont know of any shops around VA that can do a good job at this...

 

You should be fine with the 245 set up in front.... But why a +30 offset?!?!? wow...

The 285's in the back most likely rub... Go with 275's out back.

 

in regards to the offset, this is what they told me they can get. is the offset no good?? my coupe is NON brembo. what is a good offset to have?? i want a big lip....but if i have to sacrifice lip to get these tires to work i WILL!!

 

the front is going to be tucked in alot... you should go with +19 up front that would look sweet. and +17 rear but then you'd have to roll your fenders in the rear. not sure about the front though

 

OK last minute change of plans!! This is the setup

Volk SF challenges in diamond black

+28 front
+23 rear

will i rub w/ 245/35/19 bfg ta kdw2s and 285/35/19 bfg ta kdw2s??