Tein S-Tech lowering springs for coupe
#16
Re: Tein S-Tech lowering springs for coupe
Just finish installing my Tein springs....whew!! The fronts took about 1 hr to do but it was relatively easy, the back took 1/2 hr. It was a pain to do the back had to ask my neighbor to help me put the bolt back on. Put those freakin pry bars to good use on this install.
Well I'm happy to say that it looks absolutely awesome. I have a stock 17" rim and the front is tuck underneath the wheel well. The rear could use another 1/2 inch but I'm not complaining. I drove it around for about 1/2hr, fwy ride is great better than stock you can actually feel the difference right away. I could feel the rear bouncing with the stock springs but with the Tein it totally disappeared. I will post the pics I took before and after the install. I have to shoot over the tire shop and get it aligned I will post the readings as well.
<font color=blue> </font color=blue>
Well I'm happy to say that it looks absolutely awesome. I have a stock 17" rim and the front is tuck underneath the wheel well. The rear could use another 1/2 inch but I'm not complaining. I drove it around for about 1/2hr, fwy ride is great better than stock you can actually feel the difference right away. I could feel the rear bouncing with the stock springs but with the Tein it totally disappeared. I will post the pics I took before and after the install. I have to shoot over the tire shop and get it aligned I will post the readings as well.
<font color=blue> </font color=blue>
Thread
Thread Starter
Forum
Replies
Last Post
laksjd84
Steering & Suspension
16
07-12-2017 12:22 AM
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM