G35Driver - Infiniti G35 & G37 Forum Discussion
0 2017/03/02 19:39:47
Back on the rack.
Back on the rack.
0 2017/03/03 06:22:28
0 2017/03/04 10:41:56
0 2017/03/04 17:51:38
0 2017/03/04 17:52:46
0 2017/03/04 17:53:51
0 2017/03/04 17:54:51
0 2017/03/04 17:56:29
0 2017/03/04 17:57:48
0 2017/03/04 18:11:20
0 2017/03/08 00:17:40
0 2017/03/08 00:18:13
0 2017/03/08 00:19:18
This is before. I need to finish the grill now that I have added stock G35 polished tips.
This is before. I need to finish the grill now that I have added stock G35 polished tips.
0 2017/03/08 00:20:31
0 2017/03/13 20:59:50
0 2017/03/13 21:01:05
0 2017/03/13 21:01:41
0 2017/03/13 21:02:15
0 2017/03/13 21:32:33
0 2017/03/13 21:33:25
0 2017/03/13 21:33:55
Got bored at work Sunday night waiting on a patient to get to the room. Decided to design some logos for the project GT35RS. And some carryover from my old company and custom parts branding.
Got bored at work Sunday night waiting on a patient to get to the room. Decided to design some logos for the project GT35RS. And some carryover from my old company and custom parts branding.
0 2017/03/13 21:34:39
Broken bolt on the Brembo. Alot of work to figure out how to fix this, the bolt actually broke twice. Ended up drilling and tapping the threads.
Broken bolt on the Brembo. Alot of work to figure out how to fix this, the bolt actually broke twice. Ended up drilling and tapping the threads.
0 2017/06/06 01:35:34
Several hours of burning and beating the bushings out of the differential. I first burned the subframe bushing and then cut the sleeve in 2 places. Then it was a good few minutes with a 3# hammer and chisel there too. I did not drop the subframe.
Several hours of burning and beating the bushings out of the differential. I first burned the subframe bushing and then cut the sleeve in 2 places. Then it was a good few minutes with a 3# hammer and chisel there too. I did not drop the subframe.
0 2017/06/06 01:37:43
0 2017/06/06 01:41:25
Used a surgical drain bulb to pull 550ml of nasty combustion vapor water out of the catch can without need to remove it and drain.
Used a surgical drain bulb to pull 550ml of nasty combustion vapor water out of the catch can without need to remove it and drain.
0 2017/06/06 01:42:22
Ran the catch can vent to atmosphere instead of suctioning back into the intake.
Ran the catch can vent to atmosphere instead of suctioning back into the intake.
0 2017/06/06 01:44:21
Just the cutest little K&N.. it was a key chain I had.
Just the cutest little K&N.. it was a key chain I had.
0 2017/06/06 01:46:16
Bad news. Spark plug tubes full of oil
Bad news. Spark plug tubes full of oil
0 2017/06/11 01:43:11
That catch can is coming out. Needs more work.
That catch can is coming out. Needs more work.
0 2017/06/11 01:45:13
Compression testing. See the TB plugged in.. the paper towels are so the oil in the cylinders and spark plug tubes didn't spray. I pulled 40cc of oil each out of 4 of them.
Compression testing. See the TB plugged in.. the paper towels are so the oil in the cylinders and spark plug tubes didn't spray. I pulled 40cc of oil each out of 4 of them.
0 2017/06/11 01:47:03
Looks like I'm at work. . OR table
Looks like I'm at work. . OR table
0 2017/06/11 01:50:59
Organized chaos.
Organized chaos.
0 2017/06/11 01:53:46
Running. Look MA.. no smoke
Running. Look MA.. no smoke
0 2017/06/11 01:55:43
It's been a long few days but I think I fixed it..err..my mistake. You can't win them all. .but it will be better next time. Stay tuned
It's been a long few days but I think I fixed it..err..my mistake. You can't win them all. .but it will be better next time. Stay tuned
0 2017/06/11 01:57:39
17.4 lbs vs 31.7 lbs
17.4 lbs vs 31.7 lbs
0 2017/06/15 07:47:01
0 2017/06/15 07:50:21
0 2017/06/15 07:51:29
Reinstalling stock parts makes me sad... (stock pcv system)
Reinstalling stock parts makes me sad... (stock pcv system)
0 2017/06/15 07:52:54
I'll just end with this... "Thanks Honey..."
I'll just end with this... "Thanks Honey..."
0 2017/06/15 07:54:22