G35Driver - Infiniti G35 & G37 Forum Discussion
Used a surgical drain bulb to pull 550ml of nasty combustion vapor water out of the catch can without need to remove it and drain.
Used a surgical drain bulb to pull 550ml of nasty combustion vapor water out of the catch can without need to remove it and drain.
0 2017/06/06 01:42:22
0 2017/06/06 01:41:25
Several hours of burning and beating the bushings out of the differential. I first burned the subframe bushing and then cut the sleeve in 2 places. Then it was a good few minutes with a 3# hammer and chisel there too. I did not drop the subframe.
Several hours of burning and beating the bushings out of the differential. I first burned the subframe bushing and then cut the sleeve in 2 places. Then it was a good few minutes with a 3# hammer and chisel there too. I did not drop the subframe.
0 2017/06/06 01:37:43
Broken bolt on the Brembo. Alot of work to figure out how to fix this, the bolt actually broke twice. Ended up drilling and tapping the threads.
Broken bolt on the Brembo. Alot of work to figure out how to fix this, the bolt actually broke twice. Ended up drilling and tapping the threads.
0 2017/06/06 01:35:34
Got bored at work Sunday night waiting on a patient to get to the room. Decided to design some logos for the project GT35RS. And some carryover from my old company and custom parts branding.
Got bored at work Sunday night waiting on a patient to get to the room. Decided to design some logos for the project GT35RS. And some carryover from my old company and custom parts branding.
0 2017/03/13 21:34:39
0 2017/03/13 21:33:55
0 2017/03/13 21:33:25
0 2017/03/13 21:32:33
0 2017/03/13 21:02:15
0 2017/03/13 21:01:41
0 2017/03/13 21:01:05
0 2017/03/13 20:59:50
This is before. I need to finish the grill now that I have added stock G35 polished tips.
This is before. I need to finish the grill now that I have added stock G35 polished tips.
0 2017/03/08 00:20:31
0 2017/03/08 00:19:18
0 2017/03/08 00:18:13
0 2017/03/08 00:17:40
0 2017/03/04 18:11:20
0 2017/03/04 17:57:48
0 2017/03/04 17:56:29
0 2017/03/04 17:54:51
0 2017/03/04 17:53:51
0 2017/03/04 17:52:46
0 2017/03/04 17:51:38
0 2017/03/04 10:41:56
Back on the rack.
Back on the rack.
0 2017/03/03 06:22:28
0 2017/03/02 19:39:47
Way toed in.. I have toe eccentrics so that should go away. I'll run very minor rear toe in when it's done.
Way toed in.. I have toe eccentrics so that should go away. I'll run very minor rear toe in when it's done.
0 2017/03/02 19:35:58
Alignment done Monday morning but doesn't feel right. Going back Friday morning to tweak it.
Alignment done Monday morning but doesn't feel right. Going back Friday morning to tweak it.
0 2017/02/28 20:11:46
Finished up Sunday just in enough time to go to work for 12 hrs overnite..ugh
Finished up Sunday just in enough time to go to work for 12 hrs overnite..ugh
0 2017/02/28 20:09:03
Mevotech parts look good coming out of the box
Mevotech parts look good coming out of the box
0 2017/02/28 20:06:58
Smoked bushing...
Smoked bushing...
0 2017/02/28 20:05:48
Success
Success
0 2017/02/28 20:04:33
Here goes..
Here goes..
0 2017/02/28 20:03:36
Shazbot! Snapped the front subframe connector stud
Shazbot! Snapped the front subframe connector stud
0 2017/02/28 20:02:05
Rear Azenis..shaved to racing depth ;)
Rear Azenis..shaved to racing depth ;)
0 2017/02/28 20:00:20
Polish your Bilstein whenever possible..lol
Polish your Bilstein whenever possible..lol
0 2017/02/28 19:58:32
0 2017/02/28 19:57:39
Getting ready to grind out the subframe for the toe eccentrics..safety first
Getting ready to grind out the subframe for the toe eccentrics..safety first
0 2017/02/28 19:56:00
My view from the garage Friday morning
My view from the garage Friday morning
0 2017/02/28 19:50:17
0 2017/02/28 19:38:46