G35Driver - Infiniti G35 & G37 Forum Discussion
Not pretty but she's strong.
Not pretty but she's strong.
0 2017/02/25 23:01:40
Pay no attention the access hole I drilled thinking it could use a nut and bolt if I removed the stud. It goes all the way thru the frame!
Pay no attention the access hole I drilled thinking it could use a nut and bolt if I removed the stud. It goes all the way thru the frame!
0 2017/02/25 23:00:48
Shazbot! What now?
Shazbot! What now?
0 2017/02/25 22:57:43
Can't believe I have put nearly 15k on this car so far.
Can't believe I have put nearly 15k on this car so far.
0 2017/02/13 12:40:12
0 2017/02/13 12:38:54
0 2017/02/13 12:35:29
0 2017/02/13 12:34:41
0 2017/02/13 12:33:35
0 2017/02/13 12:32:22
0 2017/02/01 18:14:15
0 2017/02/01 18:08:16
0 2017/02/01 18:07:53
0 2017/02/01 18:07:14
0 2017/02/01 18:06:48
0 2016/12/09 13:54:35
0 2016/12/09 13:52:56
0 2016/12/09 13:48:39
0 2016/12/09 13:47:09
0 2016/12/09 13:46:18
0 2016/12/09 13:43:58
0 2016/12/09 13:41:12
0 2016/12/03 10:50:32
0 2016/12/03 10:49:19
Hey Nurse..here is a shot of the grille mounting
Hey Nurse..here is a shot of the grille mounting
0 2016/12/02 18:47:07
What a beautiful sight. ..back on the street
What a beautiful sight. ..back on the street
0 2016/12/02 18:45:51
Still doin'work. ..a little slower.
Still doin'work. ..a little slower.
0 2016/12/01 09:34:10
Broken right hand
Broken right hand
0 2016/12/01 09:32:48
This is how she sat for days.
This is how she sat for days.
0 2016/12/01 09:31:36
0 2016/12/01 09:30:17
Driver side motor mount came apart in my hands when I took it out. good time to replace them. I took out the long tube headers because they kept me from getting the last transmission out and made a mess. Installed some shorty headers that are wrapped with resonated test pipes.
Driver side motor mount came apart in my hands when I took it out. good time to replace them. I took out the long tube headers because they kept me from getting the last transmission out and made a mess. Installed some shorty headers that are wrapped with resonated test pipes.
0 2016/12/01 09:28:12
Buhh bye
Buhh bye
0 2016/12/01 09:26:37
WTF?!
WTF?!
0 2016/12/01 09:25:07
0 2016/12/01 09:24:55
And that is how she has sat for about 3 weeks.
And that is how she has sat for about 3 weeks.
0 2016/11/30 18:30:43
0 2016/11/30 18:30:12
0 2016/11/30 18:29:45
Clutch throw out arm pivot bolt
Clutch throw out arm pivot bolt
0 2016/11/11 19:56:28
Fits perfectly, no trimming and a simple bracket. Same lines off the valve covers (PCV on passenger side, and vent on rear drivers side) and one out to the intake.
Fits perfectly, no trimming and a simple bracket. Same lines off the valve covers (PCV on passenger side, and vent on rear drivers side) and one out to the intake.
0 2016/10/31 22:59:24
0 2016/10/31 22:58:36
Pays to read the FSM for the procedure you want to do first. I know this but, should have done it long ago to be prepared. The top pulley I thought was the water pump, it is just an idler. The WP is run off the timing chain. Oh well..done now.
Pays to read the FSM for the procedure you want to do first. I know this but, should have done it long ago to be prepared. The top pulley I thought was the water pump, it is just an idler. The WP is run off the timing chain. Oh well..done now.
0 2016/10/31 22:54:49