G35Driver - Infiniti G35 & G37 Forum Discussion
Got the power steering and oil filter lines installed
Got the power steering and oil filter lines installed
0 2017/09/02 20:00:35
Heat sink coil packs and NGK wires on
Heat sink coil packs and NGK wires on
0 2017/09/02 12:31:42
Plenty of clearance for access to everything
Plenty of clearance for access to everything
0 2017/09/02 12:31:05
Exhaust is gonna be loud on first startup
Exhaust is gonna be loud on first startup
0 2017/09/02 12:30:19
0 2017/08/26 05:34:06
0 2017/08/20 15:37:38
Driver's side won't go in until I disconnect the steering shaft
Driver's side won't go in until I disconnect the steering shaft
0 2017/08/20 15:14:08
Passenger side header installed
Passenger side header installed
0 2017/08/20 15:13:15
My little helper
My little helper
0 2017/08/20 15:12:44
0 2017/08/20 15:11:27
0 2017/08/20 15:10:52
SIKKY shifter fits great
SIKKY shifter fits great
0 2017/08/20 15:10:02
All mounted up
All mounted up
0 2017/08/20 15:09:21
0 2017/08/20 15:08:37
0 2017/08/20 15:08:03
0 2017/08/20 15:07:37
T56 from a 06 GTO with less than 10K miles
T56 from a 06 GTO with less than 10K miles
0 2017/08/20 15:05:08
Mounted and ready to go
Mounted and ready to go
0 2017/08/20 15:04:29
New slave cylinder with SIKKY lines and fittings
New slave cylinder with SIKKY lines and fittings
0 2017/08/20 15:03:06
Hole drilled to run new clutch line
Hole drilled to run new clutch line
0 2017/08/20 15:02:21
Clutch all put together and torqued
Clutch all put together and torqued
0 2017/08/18 18:05:36
New GM bolts
New GM bolts
0 2017/08/18 18:04:23
Monster stage 2 clutch & 18 LB flywheel
Monster stage 2 clutch & 18 LB flywheel
0 2017/08/18 18:02:16
Tapped every hole to clean the threads up
Tapped every hole to clean the threads up
0 2017/08/18 18:01:27
The pilot bearing got destroyed by the puller
The pilot bearing got destroyed by the puller
0 2017/08/18 18:00:25
The old pilot bearing put up a good fight but decided to come out eventually
The old pilot bearing put up a good fight but decided to come out eventually
0 2017/08/18 17:59:29
Got all the poly suspension bushings in the mail
Got all the poly suspension bushings in the mail
0 2017/08/18 17:58:16
My junk pile is slowly getting bigger
My junk pile is slowly getting bigger
0 2017/08/08 18:03:31
New steering U-joint on. The engine bay is about 90% prepped and painted. Just waiting on the Monster clutch to get here so I can drop in the motor.
New steering U-joint on. The engine bay is about 90% prepped and painted. Just waiting on the Monster clutch to get here so I can drop in the motor.
0 2017/08/08 18:01:57
0 2017/08/08 18:01:16
Cheap Amazon press has been able to push out all but two suspension bushings so far
Cheap Amazon press has been able to push out all but two suspension bushings so far
0 2017/08/08 18:00:10
More hacksaw action needed
More hacksaw action needed
0 2017/08/08 17:58:24
Rusty corroded broken bolts call for a hacksaw
Rusty corroded broken bolts call for a hacksaw
0 2017/08/08 17:57:15
Got both rear sides completely torn apart
Got both rear sides completely torn apart
0 2017/08/08 17:56:10
0 2017/08/08 17:54:46
My daughter ready to get her hands dirty
My daughter ready to get her hands dirty
0 2017/05/28 19:02:02
Ready for some new fuel lines and now I have a return line
Ready for some new fuel lines and now I have a return line
0 2017/05/28 18:55:56
Rubber hose trimmed to correct length and hose clamp installed
Rubber hose trimmed to correct length and hose clamp installed
0 2017/05/28 18:55:50
CJM metal fitting installed into factory line
CJM metal fitting installed into factory line
0 2017/05/28 18:55:43
95% put back together
95% put back together
0 2017/05/28 18:55:36