How to remove ECU
#1
How to remove ECU
<blockquote><font class="small">In reply to:</font><hr>
2003z (registered)
08/23/03 06:26 PM
Its extremely easy, only takes a phillips screwdriver and 10mm wrench.
1. pop off door sill trim
2. unscrew plastic nut holding passenger front kick panel in place
3. pop off that kick panel
4. unscrew and pull the plastic lower dash piece off
5. unplug ecu harness
6. unscrew the 2 bolts holding ecu bracket and remove.
simple, about a 10 minute job, at the most.
<hr></blockquote>
<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow/HyperGround/BorlaExhaust
2003z (registered)
08/23/03 06:26 PM
Its extremely easy, only takes a phillips screwdriver and 10mm wrench.
1. pop off door sill trim
2. unscrew plastic nut holding passenger front kick panel in place
3. pop off that kick panel
4. unscrew and pull the plastic lower dash piece off
5. unplug ecu harness
6. unscrew the 2 bolts holding ecu bracket and remove.
simple, about a 10 minute job, at the most.
<hr></blockquote>
<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow/HyperGround/BorlaExhaust
Last edited by Andy2434; 03-12-2008 at 09:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
Extreme Dimensions
Southern California
3
10-19-2015 06:28 PM