FS[SoEast]: Kinetix Suspension Kit + Eibach Sportline Springs
#1
01-01-2011, 06:12 PM
Join Date: Sep 2008
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Rear Full Kinetix Kit Still For Sale
***Rear part (traction and camber arms) of the Kinetix suspension kit still for sale***
Parts were installed on 2008 G35S for approx. 3 months. All parts are in great shape and absolutely fully functional. I'd like to sell all remaining components, Kinetix rear kit, for $220 shipped CONUS or local pick up near Atlanta, Ga for $200. I'll take paypal as payment, fees not included, or cash face to face. Thanks for looking and contact me with any questions.
FROM THE KINETIXRACING.COM WEBSITE:
The front suspension from the factory allows zero camber adjust-ability which can become a problem especially when lowering your car. Race enthusiasts also wish to add more negative camber to increase their handling without having to "slam" their car to achieve the desired camber. These arms will allow 1.5 degrees of positive camber, and 1.5 degrees of negative camber from the factory settings. So if your car is lowered 1.5" and the front camber is sitting at 2 degrees negative camber, these arms will allow you to bring them back out to .5 degrees negative camber.
** Will fit the following vehicles:
* 07-08 Infiniti G35 Sedan
* 08+ Infiniti FX 35
* 08+ Infiniti G37 coupe
* 09+ Infiniti G37 sedan
* 09+ Nissan 370z
These arms are completely TIG welded and offer a huge upgrade in strength over the factory arms. They use ENERGY SUSPENSION polyurethane bushings for increased responsiveness over the factory rubber bushings. They also use a high quality 3-piece Heim ball joint protected by a polyurethane red dust bootie. These Heim joints offer the best in suspension responsiveness and smooth operation. These Heim joints are also highly serviceable and do not require any special tools to remove. The have Teflon coatings inside for "chatter" free operation for years. We have also included grease fittings for even easier serviceability.
These adjustable rear camber arms will allow a full range of camber adjustment for your rear wheels. Also featuring upgraded ENERGY SUSPENSION polyurethane bushings, these arms are considerably stronger and stiffer than the factory arms.
These traction adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5"-2" and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate "wheel hop".
Parts were installed on 2008 G35S for approx. 3 months. All parts are in great shape and absolutely fully functional. I'd like to sell all remaining components, Kinetix rear kit, for $220 shipped CONUS or local pick up near Atlanta, Ga for $200. I'll take paypal as payment, fees not included, or cash face to face. Thanks for looking and contact me with any questions.
FROM THE KINETIXRACING.COM WEBSITE:
The front suspension from the factory allows zero camber adjust-ability which can become a problem especially when lowering your car. Race enthusiasts also wish to add more negative camber to increase their handling without having to "slam" their car to achieve the desired camber. These arms will allow 1.5 degrees of positive camber, and 1.5 degrees of negative camber from the factory settings. So if your car is lowered 1.5" and the front camber is sitting at 2 degrees negative camber, these arms will allow you to bring them back out to .5 degrees negative camber.
** Will fit the following vehicles:
* 07-08 Infiniti G35 Sedan
* 08+ Infiniti FX 35
* 08+ Infiniti G37 coupe
* 09+ Infiniti G37 sedan
* 09+ Nissan 370z
These arms are completely TIG welded and offer a huge upgrade in strength over the factory arms. They use ENERGY SUSPENSION polyurethane bushings for increased responsiveness over the factory rubber bushings. They also use a high quality 3-piece Heim ball joint protected by a polyurethane red dust bootie. These Heim joints offer the best in suspension responsiveness and smooth operation. These Heim joints are also highly serviceable and do not require any special tools to remove. The have Teflon coatings inside for "chatter" free operation for years. We have also included grease fittings for even easier serviceability.
These adjustable rear camber arms will allow a full range of camber adjustment for your rear wheels. Also featuring upgraded ENERGY SUSPENSION polyurethane bushings, these arms are considerably stronger and stiffer than the factory arms.
These traction adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5"-2" and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate "wheel hop".
Last edited by sukutash; 04-07-2011 at 06:55 AM. Reason: Some items sold. New Pricing.
#3
01-08-2011, 09:00 AM
Join Date: Sep 2008
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
#7
02-24-2011, 08:33 PM
Join Date: Sep 2008
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
03-04-2011, 04:18 AM
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Suspension-Vendor
9
01-18-2016 03:36 PM
Dundermuffin666
Brakes & Suspension
0
08-14-2015 04:01 PM
