Throttle Body Cleaned... failed! Help please!
Throttle Body Cleaned... failed! Help please!
I cleaned my throttle bodies, but I forgot to disconnect my neg. battery terminal. After I put everything back together, I started the car up, the idle started high, at about 2k.
After warming up, the engine idle surges from 2k, drops down to about 900, then back to 2k, and then to 900 again. I drove it for a bit, then the SES light came on.
I checked around the forums for an answer, and tried the idle air volume learning, just with failure and disappointment. I must not be doing something right.
Is there anyone in So. Cal (I live in LA, work near Rancho Cucamonga) who has performed the Idle air learning procedure and probably a ses light reset?
After warming up, the engine idle surges from 2k, drops down to about 900, then back to 2k, and then to 900 again. I drove it for a bit, then the SES light came on.
I checked around the forums for an answer, and tried the idle air volume learning, just with failure and disappointment. I must not be doing something right.
Is there anyone in So. Cal (I live in LA, work near Rancho Cucamonga) who has performed the Idle air learning procedure and probably a ses light reset?
I had that issue before, but its nothing to worry about,hope someone here can help.Sean who lives in Corona might be able to help.. I tried the manual you have there and Failed as well probably cause i am not very accurate with it either.
timing is critical... I've cleaned my TB many times and only had a problem the first time (that's when I realized disconnect bat then actuator)... the first time I had a problem I had to do the relearn procedure twice, second time was timed precise and worked.
Most people that report it not working end up getting it to take when they keep trying... others give up and buy new TB.
If you keep trying and time it precise, it will work.
Most people that report it not working end up getting it to take when they keep trying... others give up and buy new TB.
If you keep trying and time it precise, it will work.
Trending Topics
Please help!!!!!
Thursday after 8pm or Friday after 5pm. PM me if you want to swing by.
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM




