Alpine mra f-350
Joined: Jan 2009
Posts: 109
Likes: 0
From: Santa Clara
Alpine mra f-350
Asking 75+Shipping.
MRA-F350 Details:
5-channel Digital Theater amplifier
50 watts RMS x 5 at 4 ohms
Dolby Digital, DTS, and Dolby Pro Logic II processing built-in
optical digital input
all amplifier functions controlled by touchscreen of your compatible Alpine receiver (no built-in controls)
connects to compatible Alpine navigation systems
MOSFET power supply
CEA-2006 compliant
Bass Engine® features:
variable center-channel high-pass crossover (20-400 Hz in 1/3 octave steps, 6/12/18/24 dB per octave)
variable front left and right high-pass crossovers (20-200 Hz in 1/3 octave steps, 6/12/18/24 dB per octave)
variable rear left and right high-pass crossovers (20-200 Hz in 1/3 octave steps, 6/12/18/24 dB per octave)
sub channel preamp output (20-200 Hz low-pass filter, 6, 12, 18, or 24 dB/octave)
variable subsonic filter (20-50 Hz in 1/6 octave steps, 6/12/18/24 dB per octave)
subwoofer phase control (0/180 degrees)
time correction adjustment (0-10 mSec)
17-band parametric EQ (five bands for front, rear, and center, two bands for sub channel)
STAR Topology (minimizes internal noise and prevents ground interference)
detachable front cover
blue power LED
fuse rating: 20A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
13-3/4"W x 2-1/4"H x 9-9/16"D
The MRA-F350 requires a compatible head unit for setup and control, it cannot be used without one. The current list of compatible head units includes (but is not limited to): IVA-D100, IVA-D105, IVA-D300, IVA-D310, IVA-D900, IVA-D901, IVA-W200, IVA-W205, DVA-9860, DVA-9861 and DVA-9965.
This is ready to go, I have it in box ready to ship. This item is used but works fine, 0 defects, no scratches.
MRA-F350 Details:
5-channel Digital Theater amplifier
50 watts RMS x 5 at 4 ohms
Dolby Digital, DTS, and Dolby Pro Logic II processing built-in
optical digital input
all amplifier functions controlled by touchscreen of your compatible Alpine receiver (no built-in controls)
connects to compatible Alpine navigation systems
MOSFET power supply
CEA-2006 compliant
Bass Engine® features:
variable center-channel high-pass crossover (20-400 Hz in 1/3 octave steps, 6/12/18/24 dB per octave)
variable front left and right high-pass crossovers (20-200 Hz in 1/3 octave steps, 6/12/18/24 dB per octave)
variable rear left and right high-pass crossovers (20-200 Hz in 1/3 octave steps, 6/12/18/24 dB per octave)
sub channel preamp output (20-200 Hz low-pass filter, 6, 12, 18, or 24 dB/octave)
variable subsonic filter (20-50 Hz in 1/6 octave steps, 6/12/18/24 dB per octave)
subwoofer phase control (0/180 degrees)
time correction adjustment (0-10 mSec)
17-band parametric EQ (five bands for front, rear, and center, two bands for sub channel)
STAR Topology (minimizes internal noise and prevents ground interference)
detachable front cover
blue power LED
fuse rating: 20A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
13-3/4"W x 2-1/4"H x 9-9/16"D
The MRA-F350 requires a compatible head unit for setup and control, it cannot be used without one. The current list of compatible head units includes (but is not limited to): IVA-D100, IVA-D105, IVA-D300, IVA-D310, IVA-D900, IVA-D901, IVA-W200, IVA-W205, DVA-9860, DVA-9861 and DVA-9965.
This is ready to go, I have it in box ready to ship. This item is used but works fine, 0 defects, no scratches.
Thread
Thread Starter
Forum
Replies
Last Post
