Fully Build Long Block with Heads and Cams for $6500.....Motor has less than 5K miles on it...but will be over 5K miles after ZdayZ. This motor cost me over 11K to build new. If installed by Forged Performance...I will sell without core charge.....If shipped...I will need a core.

$6500 is a firm price....NO TRADES...ONLY CASH....Feel free to call Sharif at Forged Performance if you have any questions.

Motor is still in car and will be removed after ZdayZ.....Car will be at ZdayZ if you want to see it in person. There are a few that would like to see it before buying.....but first cash gets the motor. Cash or CC can be paid directly to Forged Performance. Motor will be inspected before leaving FP. Car is making 800WHP on DJ and over 700whp on DD.

Reason for selling: Changing to a 4.0L Stroker Motor with GTM Twin GT35r Turbo's and Cosworth Heads.....The turbo's on the car has already been paid for my Sylvan....I have been getting alot of PM's about it...so I am just putting it out there.

Go to this site to view build list and pictures www.cardomain.com/ride/808731

 

parting out?

 

No....Just selling motor. Turbo has already been sold in advance.....Stroker Motor and GTM GT35r going in.

This car will never be parted out.....




BTW: I have received a lot of PM's about the Cosworth Heads.......Thats not for sale with this motor.....Thats going on my new motor.....

 

How much for the whole car??? My leasing company is trying to screw me, and I may just get another one. especially if i can get one with a built engine with such quality and attn to detail.

 

Mike good luck with the sale, if I can ***** myself out to some old ladys and make a few bucks I will take it off your hands.

 

Too much was spent on this car to ever sell it....Plus I am spending over 25K more to get the car over 1000whp......so I am stuck with this car for life

It would be cheaper for you to buy a used G and have it built yourself. I can give you my build list so that you would have the same car

OK.... Kool..... I will go find an old lady for you... Before this motor leaves FP...it will be fully inspected.....I am hoping to get someone that will have it installed my Forged Performance....because Sharif built it....I would feel better.

 

sick set-up.. only if I didn't buy my wheels and a bunch of other stuff that I will probably come very close to your price, this is my ultimate dream built that I would LOVE to have in my car. Ehh maybe in another year or so. Free bump for the OP, NICE set-up!!

 

Yeah lol I would love to get that list. I am actually looking for a reasonably priced used G so that I can get my engine built at forged... We shall see what happens! GLWS!

 

Forged charges over $11,000 to do a build like this. I could have listed it for more....but I asked Sharif for the lowert possible price to sell it for and $6500 was the lowest what he came up with...

I am not a person that likes to haggle.....I list at the lowest price which makes it easier for all.

Well...this is the motor for you.....If you ask Forged to build this motor....He will charge you over 11K.....This motor has less than 5K miles on it for half the price.... With this motor...all he has to do is drop it in and send you on your way.

 

Dang great deal wish I had the money. If you still have it in about a month I will take it off your hand. GLWS.

Does it come with the cosworth plenum?

 

No...Just long block with Cams and Heads

 

i sent ya a pm, so this is the build correct? i thought u musta been knocked on the noggin if that price was with the Cossy heads that were on that Cardomain list


stock heads
Forged Performance Shortblock machining, blueprint, and assembly
5) Arias Zero Silicon AL EXTREME Duty Piston set 9.0:1 .020 overbore
6) Eagle Forged H Beam Rod set VQ35 w/ ARP rod
bolts
GTM Turbo Spec camshafts <<<----------- what stage, stage 1, 2 or 3??
12) Nissan OEM Rev Up Oil Pump
29) Nissan Rear Coolant Bypass System
33) ARP Main Stud Kit
34) 3.5L) Rod Bearing Set-Tri Metal:
35) 3.5L) Main Bearing Set-Tri Metal:
36) Cosworth Thrust Bearings STD
37) JWT Spring/Shim Kit
38) HKS Metal Head Gasket 97mm
39) ARP Extreme Duty Head Stud Kit
41) Engine Overhaul Gasket Kit
42) Rear Main Seal Retainer Assembly

Let's get this done

 

LOL.....The Cosworth Heads alone are over $4000.....

They are GTM Stage 2 Cams

This is the list

Forged Performance Shortblock machining, blueprint, and assembly
Arias Zero Silicon AL EXTREME Duty Piston set 9.0:1 .020 overbore
Eagle Forged H Beam Rod set VQ35 w/ ARP rod
bolts
GTM Turbo camshafts
ARP Main Stud Kit
3.5L) Rod Bearing Set-Tri Metal:
3.5L) Main Bearing Set-Tri Metal:
Cosworth Thrust Bearings STD
Heads)JWT Spring/Shim Kit
HKS Metal Head Gasket 97mm
ARP Extreme Duty Head Stud Kit
Engine Overhaul Gasket Kit
Rear Main Seal Retainer Assembly

 

cool sent ya a pm!

 

Got it