FS: 3led/in SMD Flex Strip

 
Thread Tools
 
Search this Thread
 
Rate Thread
 
  #16  
Old 10-09-2009 | 12:49 AM
Invalid_User's Avatar
Registered User
iTrader: (23)
Joined: Sep 2007
Posts: 9,738
Likes: 217
From: Tampa,Florida
how much if you do this for me i want a led strip clear corner.

Maybe with Amber and white leds.

Amber when turn signal is on
 
  #17  
Old 10-09-2009 | 12:52 AM
elayman's Avatar
Thread Starter
|
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
PMed
 
  #18  
Old 10-09-2009 | 12:52 AM
YT35's Avatar
Registered User
iTrader: (20)
Joined: Jan 2008
Posts: 1,377
Likes: 5
From: NORCAL
bump!! hella good local deal! =D
 
  #19  
Old 10-09-2009 | 02:34 AM
xx7sephiroth7xx's Avatar
Registered User
iTrader: (16)
Joined: Jun 2006
Posts: 4,408
Likes: 22
From: Oakland
G
Bump! for a good guy.
 
  #20  
Old 10-18-2009 | 06:45 PM
Greeknasty's Avatar
Registered User
iTrader: (1)
Joined: Jan 2006
Posts: 530
Likes: 2
just curious but whats the diff between these and ones you can get from vleds for 10 bucs a foot...
http://www.v-leds.com/Exterior-LED/C...74245-1-3.html
 
  #21  
Old 10-18-2009 | 07:02 PM
elayman's Avatar
Thread Starter
|
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
Mine have twice as many LEDs and I can put them in your clear corners if you want.
 
  #22  
Old 10-18-2009 | 07:41 PM
Greeknasty's Avatar
Registered User
iTrader: (1)
Joined: Jan 2006
Posts: 530
Likes: 2
oh ok cool..would i send you my clears or do you only do local?
 
  #23  
Old 10-18-2009 | 09:01 PM
sweettalker's Avatar
Registered User
iTrader: (15)
Joined: Sep 2004
Posts: 1,125
Likes: 1
From: Santa Monica CA
are you in norcal? if you were in socal i would measure and buy whatever looks better. I can't decide since it's not really in my hands..damn
 
  #24  
Old 10-20-2009 | 01:59 AM
elayman's Avatar
Thread Starter
|
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
Originally Posted by Greeknasty
oh ok cool..would i send you my clears or do you only do local?
PMed

sweettalker I'm not sure what you mean
 
  #25  
Old 10-22-2009 | 02:28 PM
Chubbs's Avatar
Registered User
Joined: Aug 2009
Posts: 47
Likes: 0
From: Memphis, TN
PM me price for the rest of it.

Thanks!
 
  #26  
Old 12-09-2009 | 02:07 PM
Flavius's Avatar
Registered User
iTrader: (2)
Joined: Oct 2006
Posts: 126
Likes: 0
corner lights, the strip that goes down along the headlight and the lights at the bottom of the door, can each be done? and how much shipped to Norcal, btw how do you wire these?
 
  #27  
Old 12-09-2009 | 03:01 PM
elayman's Avatar
Thread Starter
|
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
^ they can all be done, but I've never done any headlight modding before so if you know how to do it I can sell you the lights. Wiring for that purpose you would splice into the side marker lights or run a wire to a switch in your cabin. As for the bottom of the door, they can be done as well, it will just be a strip or 2 of leds 6-12 probably on each door, depending on how many fit. I haven't done this before but should be simple. I'm located in Berkeley so if you want to stop by sometime I can try and help you with the door lights, but I wouldn't really be able to help you with the headlights besides selling you some led strips.
 
  #28  
Old 04-17-2010 | 10:45 PM
elayman's Avatar
Thread Starter
|
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
bump!
I got a bunch of 5050 (large 3 chip) led strips now lol. There are half as many per inch as the smaller leds so instead of 120/m there are 60/m which is about 1.5/inch instead of 3. I have them in only white. These can be used as trunk lights (they really brighten up the trunk). I just plugged a strip in mine and used the double sided tape to stick it to the liner on the top of the trunk and you can't see them unless you look under, and they are really bright. Also can be used for other applications. Let me know if you need any. I've got some small leds for clear corners though if you need some
 
  #29  
Old 04-17-2010 | 11:39 PM
SG Blaze's Avatar
Registered User
iTrader: (9)
Joined: Sep 2009
Posts: 1,134
Likes: 6
From: Boca Raton, FL
pm me price for 2 clear corners and btw how would I hook them up myself, possibly amber when turn signal is on and white the rest of the time?
 
  #30  
Old 04-17-2010 | 11:57 PM
elayman's Avatar
Thread Starter
|
Registered User
iTrader: (33)
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
PM sent
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: FS: 3led/in SMD Flex Strip



All times are GMT -4. The time now is 01:23 PM.