WTB: wtb stock intake manifold bolts upper and lower from a g35 coupe
i think he's just looking for the bolts. if so, you can pick up the bolts at any decent hardware store (not Lowe's or Home Depot). below is a quote from a thread on my350z.com:
Originally Posted by bigc
There are a bunch of threads on here asking for the sizes of the OEM plenum nuts & bolts. There's some info in the FSM, but, surprisingly, even Nissan's fast system doesn't have the complete specs. Anyway, the OEM sizes are below - add 8-10mm if you're running a 5/16" plenum spacer.
Intake Manifold Collector (Upper)
Bolts 1, 3, 6, & 9 = M6 x 1 x 60mm (red)
Bolts 2, 4, & 5 = M6 x 1 x 45mm (yellow)
Bolts 7, 8, 10, 11, 13 - 16, & 18 = M6 x 1 x 25mm (green)
Nuts 12 & 17 = M6 (green; these nuts & studs are sometimes replaced with M6 x 1 x 25mm bolts in aftermarket applications)
Intake Manifold Collector (Lower)
Bolts 1-6 = M6 x 1 x 70mm (blue)
Nuts 7 & 8 = M6 (violet)
hopefully this helps someone who wants to go back to stock, but has misplaced their OEM bolts.
Intake Manifold Collector (Upper)
Bolts 1, 3, 6, & 9 = M6 x 1 x 60mm (red)
Bolts 2, 4, & 5 = M6 x 1 x 45mm (yellow)
Bolts 7, 8, 10, 11, 13 - 16, & 18 = M6 x 1 x 25mm (green)
Nuts 12 & 17 = M6 (green; these nuts & studs are sometimes replaced with M6 x 1 x 25mm bolts in aftermarket applications)
Intake Manifold Collector (Lower)
Bolts 1-6 = M6 x 1 x 70mm (blue)
Nuts 7 & 8 = M6 (violet)
hopefully this helps someone who wants to go back to stock, but has misplaced their OEM bolts.
Thread
Thread Starter
Forum
Replies
Last Post
TWASkyliner
G35 Coupe V35 2003 - 07
26
Feb 8, 2020 08:00 PM
