DIY 06 HU Removall
Joined: Feb 2006
Posts: 826
Likes: 5
From: Ft. Rucker, AL
Originally Posted by seddon
This is exactly what I was looking for, even though I have an AT sedan it should be almost the same. Great job. Post pics when you are done with the replacement.
Replacement.. is the reverse order.. I just needed access to the rear of the Head Unit to connect my tvandnavtogo box and PA11-NIS.
Banned
Joined: Apr 2004
Posts: 2,712
Likes: 1
From: socalifornia
Originally Posted by kappa1281
Do you have to remove anything before take the leather off? In other words, is this the first step?
Does the shift lock have to be fooled with?
Does the shift lock have to be fooled with?
1st step for 05 AT
... is to put the car in Neutral. I pulled and pulled to no avail at first. After that, the rest was a breeze. My only difficulty was in getting the HU back in after installing the PA11-NIS along with an internal 12V outlet. Had to move the outlet up to the nav cubby.
Joined: Feb 2006
Posts: 826
Likes: 5
From: Ft. Rucker, AL
Originally Posted by churwitz
Real_G - do you have any pictures of where you installed your PA11-NIS?
https://g35driver.com/forums/audio-video-electronics/86108-installed-nano-w-proclip-w-pa11-nas.html
Registered User
Joined: Apr 2006
Posts: 7
Likes: 0
Woohoo! Thanks for the removal instructions Real_G, I installed the AAI-NIS2 today and all seems to be working. I only broke and lost 2 plastic clips down the back of the headunit in the process, but all seemed to fit together fine without em 
Registered User
Joined: Dec 2005
Posts: 330
Likes: 0
From: OC
it's only for 05-06 sedan or 05-07 coupe.
check this out for 04: https://g35driver.com/forums/showpos...36&postcount=2
check this out for 04: https://g35driver.com/forums/showpos...36&postcount=2
Registered User
Joined: Nov 2006
Posts: 27
Likes: 0
From: Cali - Southern
Originally Posted by nm3th
it's only for 05-06 sedan or 05-07 coupe.
check this out for 04: https://g35driver.com/forums/showpos...36&postcount=2
check this out for 04: https://g35driver.com/forums/showpos...36&postcount=2
Finally found this thread ... been looking for it for awhile now. for those who were looking for it. heres a bump . also mods can you guys please move it to the DIY section? and prolly sticky it? thank you.
edit: also do i need to do anything to the shift lock? or do i just put it in neutral to remove it? (for an 06 AT coupe)
... been looking for it for awhile now. for those who were looking for it. heres a bump . also mods can you guys please move it to the DIY section? and prolly sticky it? thank you.edit: also do i need to do anything to the shift lock? or do i just put it in neutral to remove it? (for an 06 AT coupe)
Last edited by KurtayKurt; Nov 28, 2007 at 01:52 AM.
great write up. I did it today. Broke 2 of those little white clips taking the clock shroud off but other than that everything came apart and went back together without a hitch.
