newest install done :) 03 mustang, please dont mock the car ;)
Joined: Feb 2006
Posts: 538
Likes: 10
From: San Jose, CA
newest install done :) 03 mustang, please dont mock the car ;)
just gone done with an install thats a bit diffrerent than what i am used to doing...yeah yeah, i know its a mustang, so please dont rag on it too much 
The customer supplied pretty much ALL the equipment and dampening...he already had a rear seat delete kit int he car, so no, i wasnt the one that demanded the removal of the rear seats i wondering if this kind of install is also possible on a G coupe haha
goals:
1. install of all gear int he back seat area
2. dampening of key vibration areas
3. good sound quality overall
lets get started wtih the dampening:
the entire back seat area, all the way up to the rear deck, is dampened with customer supplied raammat, also dampend were the large plastic interior panels, along wtih both door panels:
moving onto the audio part, customer supplied alpine headunit resides in the stock location, note remote bass **** flushed into the panel beneath the HU and next to the LED
The customer also supplied a pair of Image Dyanmics CSX62 chameleon components. Unfrotuantely, due tot he LARGE size of these speaker, they dont fit int he doors (not even close), and the ONLY way i found that i can fit htem is with wrelatively off axis kicks...so in they went...
moving onto the major attraction, the back seat area, here is hwat it looks like all closed up.
Note the dual IDQ31 31band rack mount eqs facing foward, concealed by tthe seat when they are in the normal position. The vent in the front of the floor rack is an air inlet for a crossflow fan
note the mustang logo in raised vinyl on the main cover
and here is what lurks bgehind the covers. two imgae dynamics ID10s, trimed in blue suede fire forwards, and two arc audio 2100xxks, along wtih a kicker crossover, resides in a suede lined well underplexi and my logo. the fan, keeps them cool
finally, he has managed to keep about 70 percent of his trunk space, via a fake carpeted wall that extends to both sides, spare tire is still fully accessible
overall, i havent done a rear seat delete install like this in a long time, and i think it turned out okay and it does sound pretty dynamic overall, with eye level imaging and staging
The customer supplied pretty much ALL the equipment and dampening...he already had a rear seat delete kit int he car, so no, i wasnt the one that demanded the removal of the rear seats
i wondering if this kind of install is also possible on a G coupe hahagoals:
1. install of all gear int he back seat area
2. dampening of key vibration areas
3. good sound quality overall
lets get started wtih the dampening:
the entire back seat area, all the way up to the rear deck, is dampened with customer supplied raammat, also dampend were the large plastic interior panels, along wtih both door panels:
moving onto the audio part, customer supplied alpine headunit resides in the stock location, note remote bass **** flushed into the panel beneath the HU and next to the LED
The customer also supplied a pair of Image Dyanmics CSX62 chameleon components. Unfrotuantely, due tot he LARGE size of these speaker, they dont fit int he doors (not even close), and the ONLY way i found that i can fit htem is with wrelatively off axis kicks...so in they went...
moving onto the major attraction, the back seat area, here is hwat it looks like all closed up.
Note the dual IDQ31 31band rack mount eqs facing foward, concealed by tthe seat when they are in the normal position. The vent in the front of the floor rack is an air inlet for a crossflow fan
note the mustang logo in raised vinyl on the main cover
and here is what lurks bgehind the covers. two imgae dynamics ID10s, trimed in blue suede fire forwards, and two arc audio 2100xxks, along wtih a kicker crossover, resides in a suede lined well underplexi and my logo. the fan, keeps them cool
finally, he has managed to keep about 70 percent of his trunk space, via a fake carpeted wall that extends to both sides, spare tire is still fully accessible
overall, i havent done a rear seat delete install like this in a long time, and i think it turned out okay
and it does sound pretty dynamic overall, with eye level imaging and staging
Originally Posted by dummptyhummpty
Really nice job! Too bad your like 300 miles away.
Trending Topics
That's a clean install. Looks like he supplied you with eDead dampening from Elemental Design. With all that equipment and deadening, I hope the owner wasn't planning to go anywhere quick.
