navi screen size
#2
Re: navi screen size
The actual screen is 6.5" corner to corner. There is also a black border around the display that's another .25" on each side, then you reach the silver housing. So it's more like 7".
Russ
Black w/willow, 6MT Coupe, Nav, Aero, Nismo CAI, V1, PS2, AVelectronic Tuner, Headrest Monitors, Splash Guards..
Jax, FL
Russ
Black w/willow, 6MT Coupe, Nav, Aero, Nismo CAI, V1, PS2, AVelectronic Tuner, Headrest Monitors, Splash Guards..
Jax, FL
#3
Re: navi screen size
Here is the latest that I did... Pioneer "touch-screen" with navigation..
http://images.andale.com/f2/115/106/...5_DSC02736.JPG
<P ID="edit"><FONT class="small"><EM>Edited by RENNtech on 12/31/03 08:42 PM.</EM></FONT></P>
http://162779-http://images.andale.c...5_DSC02736.JPG
http://images.andale.com/f2/115/106/...5_DSC02736.JPG
<P ID="edit"><FONT class="small"><EM>Edited by RENNtech on 12/31/03 08:42 PM.</EM></FONT></P>
http://162779-http://images.andale.c...5_DSC02736.JPG
#5
Re: navi screen size
I am about to install a custom car pc inot the "nav pocket" and a Liliput (similar to Xenarc ) 7" XGA monitor into the "display pocket" . I really just want to remove the "lid".
I don't have a factory nav , and its a G35C.
Is there a way to remove it without removing the entire center facia , or is it screwed in from the back? The service manual is unclear how this lid mounts to the facia. Since you added a display of similar dimnesion,. I figure , you have had it all apart.
Thanx.
I don't have a factory nav , and its a G35C.
Is there a way to remove it without removing the entire center facia , or is it screwed in from the back? The service manual is unclear how this lid mounts to the facia. Since you added a display of similar dimnesion,. I figure , you have had it all apart.
Thanx.
#6
Re: navi screen size
You have to remove the dash to get to the lid. If you're installing a car pc anyways, you might as well get some practice removing/installing the dash. Takes me about 5-10 minutes to get the center section with the radio and ac out. The pocket and lid assembly is screwed in from the inside. The lid can be removed from the pocket, there are spring loaded pegs on either side of the lid that attaches it to the pocket.
#7
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Wheels & Tires-Vendor
80
08-30-2016 01:21 PM