So i have EVERYTHING perfectly wired up and running great, got the bypass done and all. now how the heck do i wire up the PAC SWI-JACK???

I get the black and red wires, and i know I use the white wire from the PAC, but where does this white wire connect in to???? also it says to do something with some Ohms things, like a 150 and 45 ohm?? i have no clue where they go or anything, lol.

someone please help me, this is the ONLY thing im missing before i can put it all back together!

What kind of radio are you wiring it to, and what year G? I have an old post, https://g35driver.com/forums/showpos...7&postcount=12 that was on my 2007 that shows what connectors and what wires. I forget which one got what resistor, the instructions told me I believe.

its an alpine w205, and its an 03 g35 coupe. just dont understand what to do with the darn ohm things? or how they go on lol

The instructions in the SWI-Jack should tell you which resistors go where. I do not know what connector and wires you need, but the PAC website will tell you. My pictures were from an 07.