my jl 1000/1 12inch sub hits so hard so it sounded wierd today and found 3screws that are lose and just jumping around when the bass hits. I found it where the bluetooth is located pop that open and see the screws inside...
im just afaird more **** will come lose...

 

well, if you don't want it some more stuff coming loose then turn the bass down.

 

Crank It UP!!!!! see if you can blow out your windshield....

 

lol really no point of having Jl and u dont turn da bass up i jus didnt expect screws to be falling out..any1 know how to take the dash near the bluetooth with the 2lights next to the moon roof out? the screws are dingling in there i can take out the bluetooth part out but not where the 2lights are located..

 

is it really faster to type any1 over anyone? I mean, how lazy can someone get?

There are four clips there. It's actually very hard to take out that piece. There aren't screws holding it in, so if you really want to, just take a panel popper or flat bladed screwdriver and pop the corners.

 

x2. The volume **** does turn counter clockwise.

??? JL subs aren't used to get loud. If you're wanting stritly loud, you need to look elsewhere. Digital Designs, some RE, some Fi, Cactus Sounds, etc. You want to get decently loud and sound good, JL is one of many companies that does the job.

Lol, that will never happen. It's near impossible to do so from sound pressure unless a cheap winshield is used or you are nearing decible levels that are extremely high. I know of people doing mid 160's and they just major flex. I was doing mid 140's on music with my previous car and it moved alot of air and flexed the windshield like crazy. Only time my winshiled broke was when I jumped on it, rather than sitting on it to minimize flex and increase SPL, so literally, my *** broke the windshield.