DD finisher. HELP!!
#1
#3
i got the JDM one through Infiniti. the HVAC is fine, its just the navi controls. my stock finisher is a little shorter, and the navi plate screwed onto the back. the new finisher has like a top edge, and is too tall. if theres not one that fits, my option looks like breaking out the dremel
#7
strange... maybe you didn't screw the navi into the right spot, or you screwed the bracket into the wrong spot. I know sometimes there's 2 holes one to hold the bracket into spot and one to screw into - if that's the case shift it up a bit. I know my Navi is tight now. sometimes I have to give it a lil pull to bring it up... but if it's that it's too tight there's a could screws you have to loosen up. I can't remember which ones off the top of my head. Sorry
Trending Topics
#8
the navi wount fit to the holes on the finisher. when you line the holes on the 2 finishers up, the DD one is about 1/4 of an inch taller than the stock. the screws are then 1/4 of an inch too high, and if you screw the navi controller to the console frame and try to put the DD on, theres that overlap.
#9
Thread
Thread Starter
Forum
Replies
Last Post