Basically I have (1) Amp hooked up to this Alpine Type R sub...being that I have little knowledge on wiring, I don't want to mis-wire anything. I have a positive and negative twisted together and then (1) positive and (1) negative that split, I think...look at pics....and where do they go into the sub....thanks, sorry for being kind of vague...

 

Those are some BLURRY pics!

It looks like you have a dual voice coil sub? If so, you'll need to either series or parallel the coils together. . .I guess there's other options, but you should really list all the stats of what amp you're using, what channels you're using, etc before you get any more specific help. . .

 

Did you buy the dual 4 or the dual 2 ohm sub?

 

Just got it wired up, sounds good and hits good...I figure I have the wiring correct because I tried numerous combos...didn't work, did work and, finally I got it to sound clean.

DUAL 2 OHM

 

The sub comes with a diagram of different wiring configurations to give you an idea of what the impedance will be so you don't fry your amp.

 

if you give me amp model number and sub model number I can tell you exactly how to wire it

 

careful, it may sound good .. but you'z may'z be'z fryin' you'z amp....

 

I jus had it checked by an installer, he says its good to go. Thanks.