Izik on mp3car is on this forum too, I think he goes by the name SuperG35 on here though. He is also selling his setup:
http://www.mp3car.com/vbulletin/showthread.php?t=29978


If your in the market for a hideaway screen that goes where the cubby hole is, I am mass producing the housing I made for my 7" screen that will work with anything with a video or even VGA output and will require a minimum of effort to install. PM or email me at godofcpu@vt.edu for more information.


See this link for more info:
http://filebox.vt.edu/users/cholbroo/g35/index.htm

 

1. You should be able to buy the stock console at any infiniti dealer. Try grubbs http://www.grubbsinfiniti.com/en_US/ If you go to 6mt.net, you can get a 15% discount code for grubbs there.

2. If your looking to put a VGA capable touch screen your choices are very limited. Theres only about 2 or 3 7" VGA touch screen makers around. Lilliput and xenarc are the biggest, both have very similar specs, however, the lilliput is about $150 cheaper, but is made with refurbished screens and less reliable then the xenarc www.xenarc.com.

3. Lilliput or xenarc.

4. It's going to be at the very least $400 to put the screen in yourself, probably a lot more if you make mistakes, plus you'll need to buy a DC power supply and inverter and ITPS which is at least another $100 to power a computer in the car. You'll probably spend another couple hundred on various other parts just to install it. My actual CPU etc. parts (mainboard + 512mb ram + 2 Ghz Anthlon) only cost around $200 so, in my opinion, if your putting a real slow computer in, your not making the most of your other purchases and wasting money. The CPU etc. is a relativly cheap part of a carputer, 266 Mhz is FAR too slow even for something thats not going to do alot. If nothing else, your boot time will suck, but also you won't be able to make use of that nice $400 screen you put in to do things like play DVDs or use visualizations.

For more information on carputers visit www.mp3car.com