Adding OEM Navi to a non-navi equiped G
#46
#48
Ok that makes sense. ill double check the plug tomorrow. Well im glad to say it works! it powered up. The only thing that doesnt work right now that i know of is illumination and the arrow moving foward and backward on the screen.
Here are the things i havent wired yet:
if you know where any of these things are or where i need to look please let me know.
anything going to the combination meter M19 & M20 (which we believe is the speedo)
i also need to find a wire for the ignition on/start
orange wire that i believe goes to a reverse signal (pin 27 off the navi control unit)
![](http://i468.photobucket.com/albums/rr42/jfdeltoro/Picture3-2.png)
Well about a weekends worth of work litterally from 10am-sundown both days led to this.
Here are the things i havent wired yet:
if you know where any of these things are or where i need to look please let me know.
anything going to the combination meter M19 & M20 (which we believe is the speedo)
i also need to find a wire for the ignition on/start
orange wire that i believe goes to a reverse signal (pin 27 off the navi control unit)
![](http://i468.photobucket.com/albums/rr42/jfdeltoro/Picture3-2.png)
Well about a weekends worth of work litterally from 10am-sundown both days led to this.
![](http://i468.photobucket.com/albums/rr42/jfdeltoro/photo-1-7.jpg)
#53
#54
If you have a multi meter see if current increases as you drive to make sure you are getting a signal. I think there is also a speed pulse on the back of the radio for the ssv setting. Look through the FSM manual to see if there is a status screen. On my 06 I have a status screen I can get to that shows all my input statuses. I.e. Reverse, speed, lights, etc.
EDIT: Page AV-65 in the 05 FSM.
EDIT: Page AV-65 in the 05 FSM.
Last edited by BacaraG35; 05-19-2010 at 01:07 PM.
#55
If you have a multi meter see if current increases as you drive to make sure you are getting a signal. I think there is also a speed pulse on the back of the radio for the ssv setting. Look through the FSM manual to see if there is a status screen. On my 06 I have a status screen I can get to that shows all my input statuses. I.e. Reverse, speed, lights, etc.
EDIT: Page AV-65 in the 05 FSM.
EDIT: Page AV-65 in the 05 FSM.
#56
#57
Follow the steps on page AV-65 onwards and you will be able to see the signal as soon as you start driving in the status screen if it is hooked up correctly.
#58
#60
Thanks man, Well its official. YOU CAN ADD OEM navi to your car as long as you have a matching harness to a matching navi. Just as long as you follow the wiring diagram in the FSM your ALL GOOD. Thank you for everything and all your help. If you guys have any questions feel free to ask.