Metra 70-7551 + Bose, Yes, it works. No it isn't quiet.
Oh, on the HU side, yeah, just tape em off. Thought you meant the harness.
Registered User
Joined: Apr 2017
Posts: 13
Likes: 0
Wiring guide
http://www.youtube.com/watch?v=ROReOCx0a1E
Okay, so I've now installed a Pioneer AVIC Z110BT, which others, including people who do this kind of thing for a living, have repeatedly failed to get working with just the Metra 70-7551 harness.
Some of them have given up and used the 70-7550 harness, which gives proper volume level, but with a very high noise level.
Since I haven't been able to confirm that the first time I did this was a fluke, I've been recommending the PAC ROEM-NIS2 to people with the similar problem as it has solved this problem for others in the past.
So now that I've done two of these, with one being one that others have had problems with, until somebody can show me they've wired this the exact same way and have the problem with the audio being nearly silent, I'm going to say that it works fine.
Okay, so I've now installed a Pioneer AVIC Z110BT, which others, including people who do this kind of thing for a living, have repeatedly failed to get working with just the Metra 70-7551 harness.
Some of them have given up and used the 70-7550 harness, which gives proper volume level, but with a very high noise level.
Since I haven't been able to confirm that the first time I did this was a fluke, I've been recommending the PAC ROEM-NIS2 to people with the similar problem as it has solved this problem for others in the past.
So now that I've done two of these, with one being one that others have had problems with, until somebody can show me they've wired this the exact same way and have the problem with the audio being nearly silent, I'm going to say that it works fine.
- Hey I've just recieved my jdm kit for my 6mt 06 g35 and I'm kind of puzzled because of the left it wires on the double din I have a kenwood dnx5180 and the harness for the radio has some left out wires wondering if u can guide me through out the wiring as well as the grounding thanks once again for the information
Joined: Nov 2008
Posts: 7,990
Likes: 1,049
From: Pennsylvania
Pay little attention to this thread. Everything you need is here: https://g35driver.com/forums/audio-v...urce-list.html
Registered User
Joined: Apr 2017
Posts: 13
Likes: 0
Hey it's done
Pay little attention to this thread. Everything you need is here: https://g35driver.com/forums/audio-v...urce-list.html
Got it done look nice for the first try only things missing now is more volume Stearing controls and some after market amps
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM
DEMoLITIoN
Audio/Video/Electronics
8
Apr 20, 2016 06:57 PM
