This is my list so far, any creative criticism is welcome. The only thing I wont budge on is the Pioneer HU.



I know I need an amp for the components, I want something relatively cheap but good from a reputable brand.

Also I already have a 12" Sub and amp which I will be adding in.

Thanks fellas.

 

I liked the Infiniti's I had in my old car, but having heard the BA pro60se's I have now, I'd never go back.

As for the amp, Soundstream's got some solid offerings - bridge this one to 2 channels and it'll have tons of headroom with those (or just about any) components.

 

The Pro60SEs are a bit out of my range, really trying to stay in the 400-500 range for components & Amp. Realistically I want to stay in the $1100 range for my whole setup, HU, JDM DD, Components, Amp, misc items.

I was also looking at some Image Dynamics CTXs
Any thoughts on those?

 

Any chance you can hold off a little while to save up some more? If this is your first shot at a HU install on the G35 it may take longer than planned anyhow; i.e., doing all that at once may be more than a day's work anyhow.

I think you can get by on the amp but some nice components will go a long way.

 

Won't be my first time, I could probably squeeze it all in during a Saturday, I had an 05 sedan and the dash removal wasn't bad, anywho, what do you have in mind for components? Any input is welcome.

 

Word. Before my current setup, I really liked Polk Audio components. But after installing this set up I don't think I could ever go back to that even.

 

Wait for uh, November, come up to Georgia and we'll do it in a few hours. Man, I wish I was back in the states already.

 

November??? I'll be in audiophile hell by then lol....where are you now wrather? You military?

 

Afghanistan, yes.

 

You could ship your car out to Hawaii..

 

Oh man...thanks for serving brother! What branch?

 

Army. Good thing - they dropped deployments to 9 months instead of 12. Bad thing, no R&R in the middle. Over 1/3 of the way through though.

 

Hope the rest of the time flies, brother.

 

OK so I might be getting a pretty sick deal on an 8400 deck....now I have a couple of Q's

Say I want to hook up my stock speakers for the time being (bypassing the blose amp), would I have to cut and splice the wires before and after the blose amp?

Is this even possible?

 

you dont need that video bypass.

look on avic411.com and you can easily do the bypass your self for free and in 5 min.

are you running your front stage off the head unit?