FS: Completed Trunk Sound System Enclosure!
#1
01-30-2013, 12:51 AM
Completed Trunk Sound System Enclosure!
I’m selling my car, therefore I’m selling my sound system fabricated to fit the coupe walls PERFECTLY.
Comes with Alpine Type R 10”, Audiobahn Amp, All needed wires to power it and to tap the bose system in case you have one, remote Bass **** with custom mount for the center console ashtray wrapped in Dinoc Carbon Fiber, all of the panels that you see, and the modified trunk plastics to support the false floor.
I hand-built this from scratch. The end goal was to have full access to the spare trunk, perfect inner cubic space the ten inch sub according to Alpine’s factory specs, while still keep the trunk looking like a subtle blend of Aftermarket and OEM look, yet functional for day to day use. I probably put 60 hours to complete this.
This comes as a complete set. All the plastics to support it, the false floors, the false walls, brackets, screws, etc. Every panel was cut to perfection to the curves on the coupe trunk.
Its made of UltraLite MDF (expensive, really light mdf) for best sounding quality yet weight control. It was then wrapped with OEM color carpet. The industrial thickness fiberglass is supported by DINOC Carbon fiber wrapped MDF and lit up by two V-Leds Led Strips. There is also a computer fan installed under the Amp in case you want the extra cooling (I never turned it on, I over-analyzed it and it ended up being unnecessary).
Price: $800 plus shipping, however locals have priority.
Installation shouldn’t be hard due to the perfect fit of the materials. It can be installed in a day. In my car, it would take 1 hour to remove and reinstall. However, I won’t install it for you since I’m moving overseas in two week, so I’m getting all of my stuff ready for the trip and at this point I literally have 0 available hours, hence the reason for the crazy price on this one-of-a-kind piece
I drive often from Miami to Tampa, therefore might be able to meet somewhere between those parts of Fla.
Bottom - Full Trunk Access
Hidden Compartment
Custom Mounted Removed Bass **** in Ashtray
Fabrication Phase
It's all about geometry to calculate the perfect .75 cubic feet for the Alpine Type R Sub
[
Comes with Alpine Type R 10”, Audiobahn Amp, All needed wires to power it and to tap the bose system in case you have one, remote Bass **** with custom mount for the center console ashtray wrapped in Dinoc Carbon Fiber, all of the panels that you see, and the modified trunk plastics to support the false floor.
I hand-built this from scratch. The end goal was to have full access to the spare trunk, perfect inner cubic space the ten inch sub according to Alpine’s factory specs, while still keep the trunk looking like a subtle blend of Aftermarket and OEM look, yet functional for day to day use. I probably put 60 hours to complete this.
This comes as a complete set. All the plastics to support it, the false floors, the false walls, brackets, screws, etc. Every panel was cut to perfection to the curves on the coupe trunk.
Its made of UltraLite MDF (expensive, really light mdf) for best sounding quality yet weight control. It was then wrapped with OEM color carpet. The industrial thickness fiberglass is supported by DINOC Carbon fiber wrapped MDF and lit up by two V-Leds Led Strips. There is also a computer fan installed under the Amp in case you want the extra cooling (I never turned it on, I over-analyzed it and it ended up being unnecessary).
Price: $800 plus shipping, however locals have priority.
Installation shouldn’t be hard due to the perfect fit of the materials. It can be installed in a day. In my car, it would take 1 hour to remove and reinstall. However, I won’t install it for you since I’m moving overseas in two week, so I’m getting all of my stuff ready for the trip and at this point I literally have 0 available hours, hence the reason for the crazy price on this one-of-a-kind piece
I drive often from Miami to Tampa, therefore might be able to meet somewhere between those parts of Fla.
Bottom - Full Trunk Access
Hidden Compartment
Custom Mounted Removed Bass **** in Ashtray
Fabrication Phase
It's all about geometry to calculate the perfect .75 cubic feet for the Alpine Type R Sub
[
Last edited by ConradoR; 01-30-2013 at 01:13 AM.
#7
02-13-2013, 05:24 PM
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mjfenix
G35 Coupe V35 2003 - 07
18
08-17-2017 05:49 AM
