Audio, Video & Electronics Post questions, reviews, and other general info about the G's Nav, sound system, or satellite radio

Noise Cancellation audio damping!!!!!

Old Aug 11, 2005 | 09:41 AM
  #1  
Sukairain's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2002
Posts: 4,312
Likes: 8
Thumbs up Noise Cancellation audio damping!!!!!

So I found out it works on the airplane........ is there any way to make this work on our cars? I figure it will be more difficult, but possible right? Do we have some sound engineers on board?

Background sound input ---> sinus wave form inverter ---> speaker output at low level ---> Theoretically block out some road noise!

Is this possible or am I should I ask the same question in 5 years?
 
Reply
Old Aug 11, 2005 | 11:09 AM
  #2  
badtziscool's Avatar
Registered User
iTrader: (1)
Joined: Feb 2005
Posts: 2,047
Likes: 0
From: Houston, TX
I could have sworn that one of the German manufacturers have already incorporated this feature into one of their high end cars.

This feature would work, but I'd imagine it'd be cheaper to just put some good sound insulation in the car.
 
Reply
Old Aug 11, 2005 | 04:33 PM
  #3  
opimax's Avatar
Registered User
Joined: May 2002
Posts: 174
Likes: 0
if yo get it to work it might be a problem to hear sirens or anything that is actually useful. On an airplane it gets rid of the droning....

Mark
 
Reply
Old Aug 11, 2005 | 08:01 PM
  #4  
shooter's Avatar
It's not the critic......
Joined: Sep 2004
Posts: 682
Likes: 2
From: Houston, TX
sinus wave?
 
Reply
Old Aug 11, 2005 | 10:59 PM
  #5  
xswl0931's Avatar
Registered User
iTrader: (4)
Joined: Dec 2003
Posts: 1,496
Likes: 0
From: Newcastle, WA
The new Acura RL has this.
 
Reply
Old Aug 12, 2005 | 01:42 AM
  #6  
IrishSkyline's Avatar
Former G35driver Vendor
iTrader: (4)
Joined: Jul 2005
Posts: 450
Likes: 0
From: Bay Area, CA
The idea of noise reduction is to cancel out unwanted sounds.. ie.. excessive ambient noises, noise turbulances, etc.. you would still be able to hear necessary sounds like sirens, horns, someone yelling at you.. the technology targets certain common frequencies as well. In a car there are so many different frequencies in play, let's just say it is very difficult! Some of the cars that do feature an early example of this, upon listenting you will probably find it not as great as the headphone examples. As someone already stated, insulation and sound deadening material would be the best bet for now.
 
Reply
Old Aug 12, 2005 | 09:52 AM
  #7  
sofl_g's Avatar
Registered User
Joined: Apr 2003
Posts: 244
Likes: 0
From: Fort Lauderdale, Fl
For it to work as well as the headphone varity, the cancellation wave has to arrive at exactly the opposite phase of the noise impulse. Position of heads in the cabin would be a fairly large problem to make it work broad band. Even a few inches of head movement will hinder the cancellation waves effect.
 
Reply
Old Aug 13, 2005 | 08:19 PM
  #8  
Sukairain's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2002
Posts: 4,312
Likes: 8
Hmmm, I suppose I can always wear a noise cancellation headphone when I drive.
 
Reply
Old Aug 28, 2005 | 02:03 PM
  #9  
iamag35man's Avatar
Registered User
Joined: Jan 2005
Posts: 20
Likes: 0
From: Tampa, FL
If I remember right, the first or second generation Q45 had this installed on the muffler so you wouldn't hear the exhaust in the car. I'm not sure if they are still doing it though.
 
Reply
Old Aug 28, 2005 | 05:01 PM
  #10  
izmir41500's Avatar
G35driver Addict
iTrader: (4)
Joined: Feb 2005
Posts: 4,374
Likes: 1
From: SoCal
i agree with irishskyline. it would be very difficult and expensive for noise cancellation, and it still wouldn't work that great because conditions are always different. so therefore noise cancellation would cancel average road noise from tires, bumps and such.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marlin84
Wheels & Tires
38
Apr 1, 2020 12:52 PM
DEMoLITIoN
Audio/Video/Electronics
8
Apr 20, 2016 06:57 PM
MrIP35
Audio/Video/Electronics
9
Nov 8, 2015 10:47 AM
dcsbh1
Brakes & Suspension
0
Oct 1, 2015 03:15 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:14 AM.