UPDATE: autostart alarms
#1
UPDATE: autostart alarms
so i talked to the installer for my autostart unit, and he said that the problem is that he needs a "tach singal wire" for the autostart to work....also he said another problem was that the doors unlock when the autostart is armed.....anybody have a solution to these problems so that i can relay the msg???
thanks for your help
thanks for your help
#5
From your other thread:
I know nothing directly about Compustars.
I can tell you that Directed recommends the 1-cylinder setting and grabbing the wire at any ignition coil or fuel injector. If the Compustar has a one cylinder setting you should be fine.
P.S. Your installer sucks *** if you have to do his research for him.
I know nothing directly about Compustars.
I can tell you that Directed recommends the 1-cylinder setting and grabbing the wire at any ignition coil or fuel injector. If the Compustar has a one cylinder setting you should be fine.
P.S. Your installer sucks *** if you have to do his research for him.
#6
Originally Posted by el_duderino
P.S. Your installer sucks *** if you have to do his research for him.
Go Compustar, you'll be happy with it. Long range, locks doors and rolls up windows on autostart, and.......the most important.....again.... long range!
Last edited by gizsf; 10-04-2005 at 01:33 AM.
Thread
Thread Starter
Forum
Replies
Last Post
AbyteZero
Engine, Drivetrain & Forced-Induction
2
03-25-2016 06:30 PM