Single-din head units
#1
#4
I did a single din upgrade a few months ago to a 05 G35x.
Two issues. You need the JDM bracket, even though the 05 has a bracket. The holes on the JDM bracket are farther forward, so when you install the pocket everything is flush. If you use the stock bracket, there is a slight gap between the pocket and the trim.
The other issue I experienced was another slight gap between the bottom of the stereo (Kenwood) and the pocket. I ended up making a piece of plastic trim to hide the gap.
I've attached a picture with the final result.
Two issues. You need the JDM bracket, even though the 05 has a bracket. The holes on the JDM bracket are farther forward, so when you install the pocket everything is flush. If you use the stock bracket, there is a slight gap between the pocket and the trim.
The other issue I experienced was another slight gap between the bottom of the stereo (Kenwood) and the pocket. I ended up making a piece of plastic trim to hide the gap.
I've attached a picture with the final result.
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
FS[NorWest]: 04 OEM Faceplate and CD/Tape Unit
Oregon13
Audio/Video/Electronics
5
03-01-2016 12:06 AM