My PS2 to TVANDNAV2GO to PA11-NIS
Joined: Feb 2006
Posts: 826
Likes: 5
From: Ft. Rucker, AL
My PS2 to TVANDNAV2GO to PA11-NIS
Well, just finished and it works fine!
PS2 running into the TVandNAVtoGO PNP module. and the audio running into the AUX on the PA11-NIS. Sounds and looks awesome!
Still have to find better wireless controllers, or clean up the wires on the controller.. it does close but with some extra effort.
Took about 3 hours.. hard wired a inverter, replaced the switch to a rocker switch and mounted next to the bass control ****.Cut up the glovebox.
And installed the NAV bypass module!
Will post more pics tommorow, I took these in the dark...
PS2 running into the TVandNAVtoGO PNP module. and the audio running into the AUX on the PA11-NIS. Sounds and looks awesome!
Still have to find better wireless controllers, or clean up the wires on the controller.. it does close but with some extra effort.
Took about 3 hours.. hard wired a inverter, replaced the switch to a rocker switch and mounted next to the bass control ****.Cut up the glovebox.
And installed the NAV bypass module!
Will post more pics tommorow, I took these in the dark...
Last edited by Real_G; Mar 26, 2006 at 07:36 PM.
looks good.
how big a hole did you have to make for the ps2 power cables??
can you shut it with the remote connected??
if you can what about when you have a memory card in there??
if so what memory card are you using and where did you buy it cause i need one!!
i can shut mine with the controller connected but not with a memory card.
how big a hole did you have to make for the ps2 power cables??
can you shut it with the remote connected??
if you can what about when you have a memory card in there??
if so what memory card are you using and where did you buy it cause i need one!!
i can shut mine with the controller connected but not with a memory card.
Joined: Feb 2006
Posts: 826
Likes: 5
From: Ft. Rucker, AL
Originally Posted by SFLG35
looks good.
how big a hole did you have to make for the ps2 power cables??
can you shut it with the remote connected??
if you can what about when you have a memory card in there??
if so what memory card are you using and where did you buy it cause i need one!!
i can shut mine with the controller connected but not with a memory card.
how big a hole did you have to make for the ps2 power cables??
can you shut it with the remote connected??
if you can what about when you have a memory card in there??
if so what memory card are you using and where did you buy it cause i need one!!
i can shut mine with the controller connected but not with a memory card.
Yes, I can shut it with remote connected. I had to cut and bend the wire on the plug for the IR reciever.
No memory card found yet..
Originally Posted by nm3th
What material did you use for your ashtray switch panel?
Originally Posted by Real_G
The outside hole is about 2.5" X 3" then the hole in the glove box is just slightly smaller.
Yes, I can shut it with remote connected. I had to cut and bend the wire on the plug for the IR reciever.
No memory card found yet..
The swithes/**** are mounted on a simple piece of plastic.. nothing special.
Yes, I can shut it with remote connected. I had to cut and bend the wire on the plug for the IR reciever.
No memory card found yet..
The swithes/**** are mounted on a simple piece of plastic.. nothing special.
who makes aftermarket memory cards for ps2??
Trending Topics
Joined: Feb 2006
Posts: 826
Likes: 5
From: Ft. Rucker, AL
No, its plugged in... most of the wire is tucked away in the cavities of the car. I left just enought to go to the PS2. Had to keep taking it out and making the hole bigger.. until it worked.
Joined: Feb 2006
Posts: 826
Likes: 5
From: Ft. Rucker, AL
Originally Posted by Strtsk8r321
How do you change to the aux input (which in you case is the PS2) on the PA11-NIS?
I installed a rocker switch.. to flip between the NAV and PS2.
