Someone help with tweeter capacitor selection
Someone help with tweeter capacitor selection
I want to replace my tweeters so I bought the Image Dynamics NX30 tweets but they dont have the crossover capacitor. The recommended crossover is 24dB/octave at 1600-2400 Hz.
Since I don't know much about this stuff, can someone tell me what capacitors I should get and where they might sell them in the LA area ? Can't wait too install these tweets.
Since I don't know much about this stuff, can someone tell me what capacitors I should get and where they might sell them in the LA area ? Can't wait too install these tweets.
Re: Someone help with tweeter capacitor selection
Koni,
In an "ideal" situation, a 24db crossover is great. That is why they list such a low "recommended" crossover point. However that would require you to build a pretty extensive crossover. Trying to make one is kinda tough.
If you want to crossover low, you can put the following capacitor in line. For a 2000hz crossover use: 19.88uF (4 ohm) or a 22uF for a crossover at 1807Hz.
I would personally recommend that you crossover a bit higher and use a 10.0 uF cap for a crossover point @ 3975Hz.
Using the recommended caps I have listed should get you some decent sound. Those silk dome tweeters should sound really decent.
BillR
In an "ideal" situation, a 24db crossover is great. That is why they list such a low "recommended" crossover point. However that would require you to build a pretty extensive crossover. Trying to make one is kinda tough.
If you want to crossover low, you can put the following capacitor in line. For a 2000hz crossover use: 19.88uF (4 ohm) or a 22uF for a crossover at 1807Hz.
I would personally recommend that you crossover a bit higher and use a 10.0 uF cap for a crossover point @ 3975Hz.
Using the recommended caps I have listed should get you some decent sound. Those silk dome tweeters should sound really decent.
BillR
Re: Someone help with tweeter capacitor selection
BillR,
Thanks for your recommendation. I'm going to take your suggestion and install the 10.0 uF cap. Now I just need to find a shop in Socal where they sell them.
Thanks again.
103964-Car.jpg
Thanks for your recommendation. I'm going to take your suggestion and install the 10.0 uF cap. Now I just need to find a shop in Socal where they sell them.
Thanks again.
103964-Car.jpg
Re: Someone help with tweeter capacitor selection
[censored]... capasitors? I think the local icecream man sells em' these days.
Trending Topics
Re: Someone help with tweeter capacitor selection
I found this website. Seems to have all the information I needed. You gotta check this out!
http://www.eatel.net/~amptech/elecdisc/caraudio.htm
http://www.eatel.net/~amptech/elecdisc/caraudio.htm
Re: Someone help with tweeter capacitor selection
koni that website is the sh$t. I've been using that website for years. If you live by westminster, check out JK electronics, they have everything there.
2003 G35 Coupe 6mt Diamond Graphite
AIM= bkchang79
2003 G35 Coupe 6mt Diamond Graphite
AIM= bkchang79
Thread
Thread Starter
Forum
Replies
Last Post
cap, capacitor, capacitors, capasitor, capasitors, condesator, crossover, ideal, inline, selection, series, sh21, tweeter, tweeters, wire




