NEED HELP 911, "slip warning light"
NEED HELP 911, "slip warning light"
I have a 04 2drs / Auto and having a situation with my vehicle. Whenever I go off an off ramp curve my "slip light" will go on and will cause the whole car to lose control. It seem like its coming from the front. Other than that my car is fine. So far I have reset my ECU and have checked my brake fluid and for leak but everything is fine. Can anyone help me out? Please pm me.
Thanks in Advance
Thanks in Advance
Last edited by manh3; Sep 18, 2009 at 10:37 AM.
I had the same thing this morning the slip and vdc turned on for no reason, took some time to turn of by turning car off fully and back on, wonder if this is just a persisting isue for everyone or just some traction isues for a few ppl
The slip and vdc light is likely turning on due to lost of traction. Whether its from hard cornering or worn tires, you should validate this and take the appropiate measures to correct it.
Trending Topics
Have you checked your brake fluid? You may be low and when you cornered hard, the fluid moved. That's probably why you needed to turn off your car and let the fluid settle down in order for there to eenough fluid in the brake lines.
well ill check that but what happen was I grove out this morning and was driving normally I came close to a stop but rolled past it and the slip,vdc and break light were on but the hand break wasnt on. I went to gas station to fill up so car was off for like 5 min but after I turned it back on the lights were still lit, it was only after a few more miles that I totally turned off the car at red light that it turned off.....would this be break fluid or something else?
havent checked yet cuz Ive been working all day but tomorrow morning ill spend all day checking out car stuff and detailing....ill let you know if it
solves it so others can do the same
solves it so others can do the same
ok so I checked fluids and all are normal level....it was funny i turned vdc off and startedburning out a bit and slip didnt turn on so i kept driving until i reached a stop, as soon as i stopped vdc slip and break turned on. Anyone have an idea whats the problem??




