Stillen's Master Cylinder brace?
Registered User
Joined: Dec 2005
Posts: 292
Likes: 0
I have to agree... I really hate the soft pedal feel. I put Stoptech SS lines on and put in Motul 600. Bled the system using TWO bottles of the Motul and the brake pedal is still soft. You can tell that the pdeal goes to a certain point and then gets soft or mushy. It has to be the MC flex.
CATO, if you get this I would really like to drive your car if the feel is improved with it.
CATO, if you get this I would really like to drive your car if the feel is improved with it.
Originally Posted by cato
You have this? Tell me how much improvement in pedal feel there is! I just upgraded my front brakes to a Wilwood BBK with SS lines, rears upgraded with Stillen slotted rotors, metal matrix pads and StopTech SS rear brake lines. This set up is a vast improvement over stock, but the pedal could be alot firmer with the brace? 
Bump.
I have the same soft pedal that a lot of people complain about. I have to double pump the brakes to get good feel out of them. I've tried bleeding them many times.
Has anyone with a soft pedal installed this brace and had it completely cure the problem?
I have the same soft pedal that a lot of people complain about. I have to double pump the brakes to get good feel out of them. I've tried bleeding them many times.
Has anyone with a soft pedal installed this brace and had it completely cure the problem?
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Engine - Intake/Fuel
7
Jan 14, 2016 01:44 AM
