cusco a-arm question
#1
Join Date: May 2006
Location: Alpharetta, GA
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
cusco a-arm question
i have purchased a set and do not believe that they will allow enough of a positive camber adjustment to get my fronts back into spec... right now i'm riding on 245/35 r19 with a 20mm offset... i believe the left is at -1.4" and the right is at -1.5" of camber... i would like to get them both back around -0.7"... can anyone help me with the proper settings (alan bolts) to achieve this?
thanks!
thanks!
#2
Registered User
iTrader: (13)
Join Date: Nov 2003
Location: Bay Area, No. Cali
Posts: 1,870
Likes: 0
Received 0 Likes
on
0 Posts
The cusco a-arms will allow 0.5 of positive adjustment out of the box so you will be at around -1.0 front and left. -1.0 of negative camber is no big deal at all and your tires will wear just fine. Just make sure you get a proper alignment and be sure the toe is set correctly. Out of spec toe will kill tires faster than negative camber. There's also a method of modding the cusco arms to give more positive adjustment if you wish to go that route.
http://www.350z-tech.com/forums/inde...&hl=cusco+arms
http://www.350z-tech.com/forums/inde...&hl=cusco+arms
Thread
Thread Starter
Forum
Replies
Last Post