Rotors and spacers
#1
Rotors and spacers
I have already replaced my front rotors and replaced them with Rotora drilled/slotted for my Brembos. After I did that I put new wheels on and I had to go with a 7mm spacer and longer stems so I could tighten the lugs enough. Now I need to replace my rear rotors but I dont want to use spacers and longer stems on my rears. Is it safe to assume I would have to do so if I went with the Rotora's? If so, anyone have experience with this and what do you recomend for replacements instead?
#3
#7
-
I checked again, It's 22mm front & 7mm rear.
Sorry.
However, it's stillquite a bit. The reason being that I run Big Lips on PIAA
& Big Brakes that need clearance. I used a 20mm Kics adapter type of spacer
first & need 2 mm more to clear, So I put a 2mm on top of the kics 20mm.
It's being 6 month. So far so good. I have 1mm clearance between wheel & Brake caliper, pretty darn close to touching
Sorry.
However, it's stillquite a bit. The reason being that I run Big Lips on PIAA
& Big Brakes that need clearance. I used a 20mm Kics adapter type of spacer
first & need 2 mm more to clear, So I put a 2mm on top of the kics 20mm.
It's being 6 month. So far so good. I have 1mm clearance between wheel & Brake caliper, pretty darn close to touching
Trending Topics
#9
Originally Posted by ma_sha1
I checked again, It's 22mm front & 7mm rear.
Sorry.
However, it's stillquite a bit. The reason being that I run Big Lips on PIAA
& Big Brakes that need clearance. I used a 20mm Kics adapter type of spacer
first & need 2 mm more to clear, So I put a 2mm on top of the kics 20mm.
It's being 6 month. So far so good. I have 1mm clearance between wheel & Brake caliper, pretty darn close to touching
Sorry.
However, it's stillquite a bit. The reason being that I run Big Lips on PIAA
& Big Brakes that need clearance. I used a 20mm Kics adapter type of spacer
first & need 2 mm more to clear, So I put a 2mm on top of the kics 20mm.
It's being 6 month. So far so good. I have 1mm clearance between wheel & Brake caliper, pretty darn close to touching
Thread
Thread Starter
Forum
Replies
Last Post