The install went pretty good. It was fairly easy, the only problem we ran into (My Shop) was getting the stock shocks and springs off, nothing a little force and huge wrenches couldnt take care of, lol. Took about 2 1/2 to 3 hours to do the front because of that little problem and about 20 minutes to do the rears. I really like the drop so far and I will probably like it even more when it fully settles. My car is very dirty right now since in NY we have had the sh*ttiest weather but will wash it tomorrow and will take some pics. The handling is very close to stock, just a bit stiffier, which I love and I have noticed less body roll when taking a turn. I will try to keep my gas above the three quarter line for about 3 weeks so it settles as good as possible. Thanx for the help and knowledge you guys have given me, had no idea about anything that dealt with suspension. Question: How much more do you guys think it will drop after it settles all the way? And one more thing, just to know, which piece is it that you are supposed to cut if you want to make the back lower, is it the rubber on the bottom of the rear springs. Just want to know because I couldnt understand what you needed to cut. By the way, the instructions that tien has on the paper says to cut 1.2 inches of the rubber bumper stopper, thats only for the Z correct? Because the G35 one was already very small to cut anymore. Thanx agin guys. Will post pics tomorrow, and thank you for any feedback.

 

Just do a search for the springmount mod.. i think you only want to cut half an inch..
Post some pics.. ide like to see what it looks like since im doing my H-techs and Konis next monday..

 

LOL, he's already done the springmount mod, kinda late on that one

 

haha.. i think im gonna have to do it to.. just want to see his pics is all..
hope i made the right choice..

 

search for his pics then, he's posted them before

 

I just bought those but haven't put them on yet....post pics soon.

Thanks,
SZ

 

how much did it lower you?